Lexmark X790 manual Moving the printer, Before moving the printer

Page 15

6Peel the recycling label off, and place it on the shipping box.

7Insert the new waste toner bottle into the printer.

8Close tray 1, and then close the front door.

Moving the printer

Before moving the printer

CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely.

CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage:

Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.

Disconnect all cords and cables from the printer before moving it.

Lift the printer off of the optional drawer and set it aside instead of trying to lift the drawer and printer at the same time.

Note: Use the handholds located on both sides of the printer to lift it off the optional drawer.

Warning—Potential Damage: Damage to the printer caused by improper moving is not covered by the printer warranty.

Maintaining the printer

15

Image 15
Contents August X790 SeriesContents Maintaining the printer Cleaning the exterior of the printerCleaning the scanner glass Cleaning the ADF parts Page Cleaning the printhead lenses Storing supplies Checking the status of suppliesChecking the status of supplies from a network computer Ordering supplies Ordering a print cartridgeOrdering a fuser or a transfer module Ordering an ADF kit Ordering a cleaning kitOrdering a waste toner bottle Ordering staple cartridgesReplacing a print cartridge Replacing suppliesPage Page Replacing the waste toner bottle Before moving the printer Moving the printerShipping the printer Moving the printer to another location