Lexmark 2500 Series manual

Page 25

Loading paper

25

If necessary, move the left or right tractor to adjust the tractors to the paper width.

Note: If you have trouble moving the right tractor to the paper width, roll the rubber tractor stop out of the seated position. Move the tractor to the paper width, load the paper, and then lock the right tractor.

10Close the left and right tractor doors.

11Replace the ribbon access cover.

12Move the tractor to align the left margin on the paper with the [A symbol printed on the rear plate.

Note: The distance from the [A symbol to the left edge of the paper determines the width of the left margin.

13Push the left tractor locking lever down to lock the tractor in place.

14Remove slack from the paper, and then lock the right locking lever.

15Open the control panel cover to access layer 2.

16Press Micro , Micro , or LineFeed to move the paper to the Top‑Of‑Form you want to use.

17Press Set TOF to set the Top‑Of‑Form.

Note: Top‑Of‑Form is not saved if the printer is turned off or runs out of paper when using the pull tractor.

18Make sure the printer is online, and the Ready light is on solid. Note: If not, press Start/Stop until the Ready light is on solid.

Image 25

Contents January Quick ReferenceContents Maintaining the printer Understanding Setup mode and menu optionsPrinter overview Learning about the printerPrinter front view Part nameFeature/function 2580/2581 2590/2591 Understanding the printer features and functionsPrinter back view Print styles Feature/function All modelsUPC ‑A Understanding the control panel buttons Using the control panelButton Function Understanding the control panel lights Locking and unlocking the control panel Using the Load/Unload functionLight Light status What it means Selecting a Tractor mode Loading paper Setting the forms thickness leverPaper paths for the push tractor Paper pathsSetting the Tear Off position Using the Tear Off functionPaper paths for the pull tractor Loading continuous paper Loading continuous forms using the push tractorPage Page Front loading continuous forms using the pull tractor Page Page Bottom loading continuous forms using the pull tractor Page Page Page Page Loading a cut form or envelope manually Loading cut formsLeft paper guide Cut form or envelope Right paper guide Aligning the left margin Setting Top‑Of‑Form for continuous forms in push mode Setting Top-of-FormSetting Top‑Of‑Form for a cut form or an envelope Setting Top‑Of‑Form for continuous forms in pull modeSetting Top‑Of‑Form in a macro Paper types and sizes supported by the printer Paper and specialty media guidePaper types Single Multiple part Envelopes Push tractor position Changing tractor positionsPull tractor position Converting the push tractor to pull tractor position Converting the pull tractor to push tractor position Page Using Setup mode Understanding Setup mode and menu optionsTo Select Press Control Options Current Press Changing menu settings an exampleMain menu options Main Menu optionsForms Macro Options Data OptionsForms Macro options Paper Handling Options Data optionsBuffer Control options Uni‑Dir Printing Paper Out AlarmAuto Ready Cut Sheet Demo PrintEpson mode IBM modeOKI mode Emulation optionsHonor Init Interface SelectionMaintaining the printer Cleaning the printerOrdering supplies Removing the ribbon cartridgeRecycling Lexmark products Cleaning the outside of the printer

Related manuals

Manual 58 pages 45.2 Kb