Lexmark 2500 Series manual Control options

Page 42

Understanding Setup mode and menu options

42

Auto LF

Requires a line feed to occur.

•On—A line feed is performed for each Carrier Return (CR) code received.

•Off—A line feed does not occur when a CR code is received.

Note: Off is the factory default setting.

Auto CR

Requires a CR to occur.

•On—A CR is performed for each line feed code received.

•Off—A CR does not occur when a line feed code is received.

Note: Off is the factory default setting.

Zero Slash

•On—The zero (0) prints with a slash down the middle.

•Off—The zero (0) prints without a slash down the middle.

Note: Off is the factory default setting.

Download to NLQ II (available for 2580/2581 models only)

•Enabled—Reserves a portion of the receive buffer for downloading fonts

•Disabled—Uses the entire buffer as a receive buffer

Note: Enabled is the factory default setting.

Download (available for 2590/2591 models only)

•Enabled—Reserves a portion of the receive buffer for downloading fonts

•Disabled—Uses the entire buffer as a receive buffer

Note: Enabled is the factory default setting.

Code Page Sub.

•Enabled—Substitutes code page 858 for 850 to allow older programs access to the European characters

•Disabled—No code page substitution

Note: Disabled is the factory default setting.

Control options

Note: Use Setup mode to configure the printer according to your needs. To print a list of all default settings, press LineFeed from the Main menu.

The following list items outline and explain the Control options and settings you can use with the printer:

Image 42

Contents Quick Reference JanuaryContents Understanding Setup mode and menu options Maintaining the printerPrinter front view Learning about the printerPrinter overview Part nameUnderstanding the printer features and functions Feature/function 2580/2581 2590/2591Printer back view Feature/function All models Print stylesUPC ‑A Using the control panel Understanding the control panel buttonsButton Function Understanding the control panel lights Using the Load/Unload function Locking and unlocking the control panelLight Light status What it means Selecting a Tractor mode Setting the forms thickness lever Loading paperPaper paths Paper paths for the push tractorUsing the Tear Off function Setting the Tear Off positionPaper paths for the pull tractor Loading continuous forms using the push tractor Loading continuous paperPage Page Front loading continuous forms using the pull tractor Page Page Bottom loading continuous forms using the pull tractor Page Page Page Page Loading cut forms Loading a cut form or envelope manuallyLeft paper guide Cut form or envelope Right paper guide Aligning the left margin Setting Top-of-Form Setting Top‑Of‑Form for continuous forms in push modeSetting Top‑Of‑Form for continuous forms in pull mode Setting Top‑Of‑Form for a cut form or an envelopeSetting Top‑Of‑Form in a macro Paper and specialty media guide Paper types and sizes supported by the printerPaper types Single Multiple part Envelopes Changing tractor positions Push tractor positionPull tractor position Converting the push tractor to pull tractor position Converting the pull tractor to push tractor position Page Understanding Setup mode and menu options Using Setup modeTo Select Press Changing menu settings an example Control Options Current PressForms Macro Options Main Menu optionsMain menu options Data OptionsForms Macro options Data options Paper Handling OptionsBuffer Control options Auto Ready Cut Sheet Paper Out AlarmUni‑Dir Printing Demo PrintOKI mode IBM modeEpson mode Emulation optionsInterface Selection Honor InitOrdering supplies Cleaning the printerMaintaining the printer Removing the ribbon cartridgeCleaning the outside of the printer Recycling Lexmark products

Related manuals

Manual 58 pages 45.2 Kb