Important Safety Information
Your Okidata printer has been carefully designed to give you years of safe, reliable performance. As with all electrical equipment, there are a few basic precautions you should take to avoid hurting yourself or damaging the printer.
•Carefully read the provided setup and operating instructions.
•Save all provided documentation for future reference.
•Read and follow all warning and instruction labels on the printer itself.
•Unplug the printer before you clean it. Use only a damp cloth; do not use liquid or aerosol cleaners.
•Place your printer on a firm, solid surface. If you put it on something unsteady, it may fall and be damaged. If you place it on a soft surface, such as a rug, sofa, or cushion, the vents may be blocked, causing the printer to overheat.
•Protect your printer from overheating. Make sure no obstructions block the openings of the printer. Do not put the printer on or near a heat source (such as a radiator or heat register). Keep the printer out of direct sunlight. Allow enough room around the printer for adequate ventilation and easy access to the paper trays. If you put the printer in any kind of enclosure, make sure the enclosure is properly ventilated.
•Do not use your printer near water. Do not spill liquid of any kind into it.
•Be certain that your power source matches the rating listed on the back of the printer. If you are not sure, check with your dealer or with your local power company.
•Your printer has a grounded,
•Install the printer near an easily accessed power outlet.
•Avoid damaging the power cord. Do not put anything on it or place it where it will be walked on. If the cord becomes damaged or frayed, replace it immediately.