•If you are using an extension cord or power strip with the printer, make sure that the total of the amperes required by all the equipment on the extension is less than the extension’s rating. The total ratings of all equipment plugged into the outlet should not exceed 15 amperes.
•Do not poke anything into the ventilation slots of the printer. You could get an electrical shock or cause hazardous electrical arcing, which could cause a fire.
•Aside from the routine maintenance described in the documentation, do not try to service the printer yourself. Removing the cover may expose you to shocks or other hazards.
•Do not make any adjustments other than those outlined in the documentation. You may cause damage that will require extensive repair work. The provided documentation explains how to get your printer serviced by qualified Okidata technicians.
If anything happens that indicates that your printer is not working properly or has been damaged, unplug it immediately and follow the procedures in the provided documentation for having your printer serviced.
Here are some of the things to look for.
•The power cord or plug is frayed or damaged.
•Liquid has been spilled into the printer, or the printer has been exposed to water.
•The printer has been dropped, or the cabinet is damaged.
•The printer does not function normally when you are following the operating instructions.
Warranty, Regulatory Information, and Specifications