Part 3. Using the R536 | 2. Select “BLINK XXXX” as your wireless network and enter the default network key, |
| “12345”. |
3.1 Connecting the R536 |
|
Note | Note |
For optimal performance it’s recommend that the R536 is oriented vertically in a standing position (as shown to the below).
The last 4 digits, ‘XXXX’ of the SSID are the last four digits of your MAC address. You can find the MAC address of your R536 on the label under the battery.
3.Click Connect
3.2 Opening the Browser Interface
1. Open your web browser and enter http://192.168.5.1 or http://WIMAX_AP.hotspot into the address window.
2. Click the Login button on the right top of the browser. The message will open to require administrative ID & Password. The default ID and Password is admin/admin.
When you press the power button:
The R536 power LED should light up.
A solid green battery LED of indicates if the device is charged over 40%.
1.Turn on the R536 and ensure the WiFi is enabled on your PC or laptop. You can view your available wireless networks by going through the control panel, network connections or system tray (lower right hand corner of your screen).