Section 2: Hardware and Software Setup
Setup
This section will describe the
A. HARDWARE SETUP
Step 1: Applying Power
•Locate the power cord supplied with the unit.
•Place one end of the power cord into the plug on the back of the unit and
the other end into a surge protected outlet.
• Turn on the power switch located on the back of the unit above the fan.
•Unit will initialize for approximately 60 seconds.
Step 2: Installing Ink Cartridges
•Using the LCD Control Panel access the Main Menu of the XRn by pressing the button.
Choose "Install Cartridges"
•Using the key provided, open the front
cover of the unit. The cartridge carrier will move to the
load position.
• Open the ink cartridge covers.
•Remove the ink cartridge from its packaging.
•Slowly remove the tape covering the cartridge's print head, being careful to avoid damaging the barcode label on the underside of the cartridge.
6Hardware and Software Setup