Primera Technology DP-XRn Disc Output Location, Enable Bi-di Printing, Alignment Calibration

firmware, alignment and number of discs printed with your unit.

Disc Output Location

Do not change this setting! It should be left in the Kiosk mode setting.

Enable Bi-di Printing

When enabled the XRn will print bi-directional for faster print- ing. The default is uni-directional printing. When you enable bi-directional printing, you should perform the Alignment Calibration described later in this section. Please note that the calibration is stored on your computer, so if you move to a new computer you must repeat the calibration.

Alignment Calibration

The Alignment Calibration allows you you create a test print that will provide you with values to configure your printer for Bi-Di- Printing and to align the color and black cartridges for Color+Black printing. If Bi-Di Printing is enabled, or if you use Color+Black as a cartridge type in the driver settings, it is important to perform this calibration every time you change a car- tridge. To print, click the Alignment Calibration Properties button then click Yes.. The print will look like this:

	0	4	8	12
A	1	5	9	13
	2	6	10	14
	3	7	11	15

B

0 2 4 6 8 10 12 14

C

0 2 4 6 8 10 12 14

0 2 4 6 8 10 12 14

D

Administrator Utility and Advanced Functions 35