Primera Technology III manual Do not Touch the Copper Area

TOC INDEX

2.Remove the ink cartridge from its packaging.

3.Remove the tape covering the cartridge’s printhead.

DO NOT TOUCH THE COPPER AREA!

4.Press and release the Ink Cartridge button to move the carrier to the load position.

5.Insert the ink cartridge into the cartridge carrier, copper end first.

6.Push the cartridge back until it snaps into place.

7.Press and release the Ink Cartridge button again to reset the cartridge carrier.

8.Close the printer’s front cover.

NOTE: When changing to subsequent new cartridges, refer to Section E.

NOTE: A Spare Ink Cartridge Holder is included with your printer. This holder provides a convenient place to store an extra ink cartridge and also prevents an opened ink cartridge from drying out. To use this holder, simply insert an Ink Cartridge into the holder, copper-end first, until it snaps into place.

Ink Cartridges and Printable CDs 5