Primera Technology Optical Disc Printing System user manual Kiosk Mode

Page 33

TOC

INDEX

The following is a description of the printer driver settings:

•Cartridge to use

The Black and Color setting will use both cartridges when printing your image. Color will only use the Color Cartridge, and Black Only will only use the monochrome cartridge for printing.

•Kiosk Mode

Kiosk Mode will allow you to increase the capacity of your Printer from 50 to 100 discs by dispensing finished discs out the front of the unit instead of dropping them to the output bin. This allows you to place blank discs in both the input and output bins doubling your capacity.

Attach the Kiosk Kit to the Printer using the Kiosk Kit installation instructions that came with your printer. This setting will be overridden by the Kiosk Mode setting in Discribe's Robot Write or Job Details Pane.

•Print Quality

There are three options for image quality. Keep in mind that Normal provides the fastest print at lower quality while Best delivers the best quality at a slower print speed.

•Disc Surface Quality

This setting also affects the Quality of the printed image by altering the color matching profile. Start with the default setting for fastest printing and the least ink consumption. If the quality needs improvement, move to the next highest setting.

•Intensity

The Intensity setting will control the amount of ink saturation on the disc. When printing onto the Primera ToughCoat discs, 96% is usually sufficient. When printing on to other brands of media, or if you would like to print darker colors, you may wish to increase or decrease the Intensity setting.

•Inner Diameter

The inner diameter refers to the size of the non-printed center on your disc. The size of the center hub can vary from one type of media to the next. This allows you to set the inner diameter in millimeters allowing you to print all the way to the center hub regardless of the type of disc you are using. For the discs that Primera sells, use the following guide for Inner Diameter:

−38.3 mm for Primera's Tuff-Coat CDR

−24.9 mm for the Hockey Rink Disc, Business Card Disc and 80mm CD

Printing Discs on a Mac 29

Page 32 Page 34
Image 33
Page 32 Page 34
Contents For Macintosh and PC Printing History Table of Contents Interactive Feature in this Getting Started Thank YOU…Choosing a Good Location Unpacking and Inspection Front Panel and Top Identifying the PartsPC System Requirements Rear PanelOverview of Operation MAC System RequirementsIndex Installing the PC Software Hardware and Software SetupInstalling the MAC Software Set-UpHardware Setup Applying PowerLoading Media Discs Index Select Install the software automatically and click Next Connecting the USB 2.0 CableDo not Touch the Copper Area Installing Ink CartridgesTutorial Printing Discs on a PC Index Index Printing Discs on a PC Setting UP the Printer DriverPaper Size Non-printable Outer Margin ResolutionDisc Surface Quality Cartridge TypeCalibration Options Ink SaturationInner Diameter Inner Diameter Non-Printed DiameterBack Center The Print ImageClean/Change Cartridges & Check Ink Levels Enable Ink Low WarningClean/Purge Change CartridgesDetails Disc Output Location Using SurethingIndex Index Using Kiosk Mode Using Other Graphics ProgramsPrinted Label Format Requirements Printing Discs on a MacPrinter Options PrintingPrint Settings Kiosk Mode Outer Margin Configuration UtilityClean Cartridge Change Cartridge Alignment Calibration PrintImage Alignment Tough lines whose Index LED Interpreting the Printers Indicator LightsMaintenance Cleaning the PrinterPerforming a Robotic SELF-TEST Cleaning the INK Cartridges Clearing a Media JAMTransporting the Printer Technical Support DVD-R, DVD RAM, DVD+R, DVD+R Technical SpecificationsIndex Page Page
Top Page Image Contents