Primera Technology 6 user manual Toc

TOC INDEX

The Cartridge Alignment button will perform a test print to calibrate CMY cartridge to the Kmc photo cartridge as well as the printing and also the color-to-black offset values. Place a CD in the disc tray before clicking on this button. Your print should look something like this:

				0	4	8	12
			A	1	5	9	13
				2	6	10	14
				3	7	11	15
B
							10	12	14	16	18
0	2	4	6	8

C

0	2	4	6	8						10	12	14	16	18
			D 0		2	4	6	8	10	12	14

After the test print is completed, examine the lines displayed after A,B,C and D. Each of the lines will have a number associated with it. Enter the number for the straightest line for for A,B,C and D in the space provided in the software.

Centering the Print Image contains options to allow you to make sure images are aligned properly on the media.

NOTE: Your printer comes from the factory pre-calibrated to print the image in the center of the CD. You can use this adjustment if you need to fine-tune this location.

If you ever wish to verify your factory-calibrated Vertical and Horizontal calibration settings, you can run a simple calibration procedure to assure that your images will be centered when printed on a CD. To do this, refer to the following steps:

1.Verify that a disc and a color ink cartridge are installed in the printer. It is important to use the same disc you normally use for your publishing because different brands of discs may vary slightly in size. Also, verify that the printer is powered ON and that it is connected to your computer.

Using the CD/DVD Printer 6 with Windows 17