TOC | INDEX |
2.Click on the Properties button. Click Yes to preform the test print. (Later, if you want to enter an adjustment without printing a test print, click No.) The printer will begin printing the calibration test print.
3.When the print is complete, rotate disc 180º and put the disc back in the input bin and repeat
step 2 using the same disc.
4.When the second run of the print is compete, you should have a test print that looks something like the following:
BACK
NOTE:
After printing this image once, rotate this CD so the ARROWS point
to the BACK of the printer and print again.
5 4 3 2 1 0 1- 2- 3- 4- 5-
5BACK
4
3 |
|
| |
2 |
|
| |
1 |
|
| |
0 | number) SAME the be (must | ||
| tough lines whose | ||
| |||
number the enter and Find | |||
| Calibration Vertical | ||
| |||
|
| ||
|
| ||
5 4 3 2 1 0 1- 2- 3- | 4- | 5- | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5 4 3 2 1 0 |
| ||||||||||
number) SAME the be (must |
|
| |||||||||
|
|
| tough lines whose |
|
| ||||||
number the enter and Find |
|
| |||||||||
| Calibration Horizontal |
|
| ||||||||
5.Along the Vertical axis of the printed disc, find the number whose lines touch. For example, in the above illustration, the number would be 2. Enter that number into the Vertical box of the Calibration window and 0 would be entered for the Horizontal axis.
6.Select the OK button. Your images should now be centered when printed on a disc.
18 Using the CD/DVD Printer 6 with Windows