Primera Technology CD Color Printer II manual Using the CD Color Printer with Macintosh

¥If creating a label for a CD, set your page size to 4.56Ó x 4.56Ó (116 x 116mm). Although your image will appear square on screen, the printer driver will automatically crop your image to the round shape of a CD for printing. The driver will also automatically crop out the center 1.6Ó (41mm) of your image to accommodate a CDÕs non-printable center hub. If you would like to better visualize where the round outside edge and the round non-printable center of a CD will fall in relation to your image, simply draw one circle with a 4.56Ó (116mm) diameter and another with a 1.6Ó (41mm) diameter. Then, center both circles within your active page or canvas area. These circles will serve as a guide while designing your image. Be sure to delete these circles before printing.

¥If creating a label for a jewel case Booklet, set your page size to 4.63Ó x 4.67Ó (117.7 x 118.5mm).

¥If creating a label for a jewel case Insert, set your page size to 4.57Ó x 5.9Ó (116 x 150mm).

3.Once you have created your image and are ready to print, select Page Setup (or the equivalent) from the programÕs File menu to verify that the printer driver settings are correct for your image. Be sure the proper Media and Ink Cartridge options are selected according to the supplies you have installed in the printer. Once the driver is set, select Print from the programÕs File menu.

4.The printer driver will then begin to process the image. Depending upon the size of the image and the processing speed of your computer, processing time can take from several seconds to a few minutes.

5.Once processing is complete, the printer will begin to print. Print time will vary depending on whether you are printing with a color or monochrome cartridge and on which Print Quality setting you selected. When printing is complete, the CD Tray will automatically open and remain fully extended until the next print job is received.

36 Using the CD Color Printer with Macintosh