If your network allows automatic confi guration the radio will acquire a network address, and will then enter the main Internet Radio menu (paragraph 13 overleaf).
There are two indicator lights incorporated into the
Green ON = Link established; OFF = no connection
Yellow Flashing = Data transfer
If your network does not support automatic confi guration or if you wish to set it up manually then you should select '[Manual confi g]' instead of selecting '[Wired]' in the Network Wizard (see page 14 for more information).
6.If you wish to use a WiFi connection, you will fi rst need to identify your network in the list of network names presented by the Network Wizard. If the radio cannot fi nd any networks then you will have to get your wireless router working (please see the instructions supplied with it) or you may be too far from the router.
When the radio fi nds your wireless network, it displays the Network Name (SSID) for the wireless access point on the screen.This is a name that is allocated to the access point in your router by the person who set up the network - for example: 'Jones family' or 'Paul's network'.
It is possible, and in some locations highly likely, that your radio will fi nd more than one wireless network, in which case you should choose which one you need to connect to.
7.Rotate the Select control to see the SSID for each wireless network that the radio has found. If your network is shown proceed to step 9 on the next page. If it is not shown then proceed to step 8.
If you make a mistake at any point, use the Back option to go back to the previous screen.
Configuration
5,7
If you need any further advice, please call our Technical Helpline on 020 8758 0338 | 10 |