Operating your radio - FM
1.Carefully extend the telescopic aerial and press the On/Off button to switch on your radio.
2.Press the Mode button as needed to select the FM mode display.
3.RotatetheTuning/Selectcontrolinaclockwisedirection.Thedisplayed frequency will increase. Press the Tuning/Select control to carry out an
4.The display will show the frequency of the signal which has been found. If RDS information is available, after a few seconds the display will show the radio station name.
If you only hear hiss or interference, simply press the Tuning/Select controltoscanfurther.Yourradiomayhavefoundaspuriousinterference signal.
5.To fi nd more FM stations press the Tuning/Select control to repeat the scan operation. To scan down in frequency, rotate the Tuning/Select control in a
6.When the end of the waveband is reached your radio will recommence tuning from the opposite end of the waveband.
7.Use the Volume buttons to adjust the sound level as needed.
1
2
7
49