Jameco Electronics 527822 manual System Requirements, Package Contents

Introduction

Thank you for ordering the USB 2.0 DOCK. The USB 2.0 DOCK is an intelligent expansion module, which connects to a PC or notebook via Universal Serial Bus (USB) port, providing one high-speed RS-232 serial port, one printer port, one PS/2 keyboard & mouse and 4 downstream USB ports. The USB 2.0 DOCK features easy connectivity for traditional serial devices, keyboards, mice and other USB devices and provides up to 480Mbps USB2.0 High Speed capability.

By simply plugging in a USB 2.0 DOCK, you will:

Add one high-speed serial port, one printer port, one PS/2 keyboard & mouse and 4 downstream USB ports to your PC or notebook in seconds.

Three USB High Speed downstream ports and one USB Full/Low Speed downstream Port.

Improve the inconvenience of configuring old PC solutions like card extension solutions, which require adjusting IRQ or jumper settings and the incompatibility of various brands of docking solutions or bus repeaters.

Avoid the hassle of removing your PC case, or rebooting the operating system during installation.

System Requirements

A PC with a minimum of a 75MHz Pentium, or equivalent A minimum of 16M bytes of RAM.

One available USB type A downstream port. (UHCI, OHCI, or EHCI) Windows 98 or later.

Package Contents

The product you purchased should contain the equipment and accessories shown as follows:

USB 2.0 DOCK

One 6’ USB AB type cable

One 2A switching power adapter (optional)

One USB 2.0 DOCK driver and User’s manual CD

USB 2.0 DOCK User’s Manual

- 3 -