Jameco Electronics 527822 manual LED Indicator, USB Indicators

Page 6

LED Indicator

Power Indicator

The Power Indicator will turn ON when bus power is supplied.

USB Indicators

There are four USB indicators to show if the USB Downstream Ports are ready for use.

1.If the USB 2.0 DOCK is not ready for use, the USB Indicators will turn OFF, and the USB Downstream Ports cannot be used.

2.If the USB 2.0 DOCK is ready for use, the USB Indicators will turn ON, and you can use all the functions of the USB 2.0 DOCK.

3.If over-current happens for certain USB Downstream Ports, the corresponding USB Indicator will turn OFF to indicate that this port is not working now.

4.When over-current situation is resolved, the USB Indicator will turn ON again.

Figure 2

USB 2.0 DOCK User’s Manual

- 5 -

Image 6

Contents Jameco Part Number USB 2.0 Dock Index Package Contents System RequirementsConnectors USB 2.0 Dock FunctionsLED Indicator USB IndicatorsInstalling USB 2.0 Dock Win98/98SE/Me Driver Installation Figure A-1A4. Click Next to continue Ref Figure A-4 A8. Click Next to continue Ref Figure A-5 Figure B-1 B4. Click Next to continue Ref Figure B-4 C3. Click Next to continue Ref Figure C-3 C4. Click Next to continue Ref Figure C-4 Figure D-1 D4. Click Next to continue Ref Figure D-4 E3. Click Next to continue Ref Figure E-3 Figure E-4 Win2000 Driver Installation Figure Win2k-1Click Next to continue Ref Figure Win2k WinXP Driver Installation Figure WinXP-1Congratulations!! You have finished installing USB 2.0 Dock Set Up the Printer Device For Windows 98/98SE and MeUSB 2.0 Dock User’s Manual For Windows 2000 and XP Set up the HyperTerminal with USB to serial port USB 2.0 Dock User’s Manual Uninstalling the Driver Program For WIN2000/XP Application Note Disclaimer