Philips 273P3L  Press OK to show the OSD On, Screen Display menu,  Press Down Arrow to select

9.Troubleshooting & FAQs

v Unplug all cables, then connect your PC to the monitor that you used previously.

v In the Windows Start Menu, select Settings/ Control Panel. In the Control Panel Window, select the Display icon. Inside the Display Control Panel, select the 'Settings' tab. Under the setting tab, in box labeled 'desktop area', move the sidebar to 1920 x 1080 pixels.

v Open 'Advanced Properties' and set the

Refresh Rate to 60Hz, then click OK.

v Restart your computer and repeat step 2 and 3 to verify that your PC is set at 1920 x 1080 @60Hz.

v Shut down your computer, disconnect your

old monitor and reconnect your Philips Monitor.

v Turn on your monitor and then turn on your PC.

Q2: What is the recommended refresh rate for Monitor?

Ans.: Recommended refresh rate in Monitors is 60Hz, In case of any disturbance on screen, you can set it up to 75Hz to see if that removes the disturbance.

Q3: What are the .inf and .icm files on the CD-ROM? How do I install the drivers (.inf and .icm)?

Ans.: These are the driver files for your monitor. Follow the instructions in your user manual to install the drivers.Your computer may ask you for monitor drivers (.inf and .icm files) or a driver disk when you first install your monitor. Follow the instructions to insert the ( companion CD-ROM) included in this package. Monitor drivers (.inf and .icm files) will be installed automatically.

Q4: How do I adjust the resolution?

Ans.: Your video card/graphic driver and monitor together determine the available resolutions.You can select the

	desired resolution under Windows®
	Control Panel with the "Display
	properties".
Q5:	What if I get lost when I am making
	monitor adjustments via OSD?
Ans.:	Simply press the OK button, then select
	'Reset' to recall all of the original factory
	settings.
Q6:	Is the LCD screen resistant to
	scratches?
Ans.:	In general it is recommended that
	the panel surface is not subjected to
	excessive shocks and is protected from
	sharp or blunt objects.When handling
	the monitor, make sure that there is
	no pressure or force applied to the
	panel surface side.This may affect your
	warranty conditions.
Q7:	How should I clean the LCD surface?
Ans.:	For normal cleaning, use a clean, soft
	cloth. For extensive cleaning, please use
	isopropyl alcohol. Do not use other
	solvents such as ethyl alcohol, ethanol,
	acetone, hexane, etc.
Q8:	Can I change the color setting of my
	monitor?
Ans.:	Yes, you can change your color setting
	through OSD control as the following
	procedures:
	v Press "OK" to show the OSD (On
	Screen Display) menu
	v Press "Down Arrow" to select the
	option "Color" then press "OK" to
	enter color setting, there are three
	settings as below.

1.Color Temperature;The six settings are 5000K, 6500K, 7500K, 8200K, 9300K and 11500K.With settings in the 5000K range the panel appears ‘warm,' with a red-white color tone, while a 11500K temperature yields ‘cool, blue-white toning."

2.sRGB; this is a standard setting for ensuring

43