Philips 220S2SB/27, 220S2plus user manual Safety precautions and maintenance, Operation

Page 3

1. Important

This electronic user’s guide is intended for anyone who uses the Philips monitor.Take time to read this user manual before you use your monitor.

It contains important information and notes regarding operating your monitor.

The Philips guarantee applies provided the product is handled properly for its intended use, in accordance with its operating instructions and upon presentation of the original invoice or cash receipt, indicating the date of purchase, dealer’s name and model and production number of the product.

1.1 Safety precautions and maintenance

Warnings

Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards.

Read and follow these instructions when connecting and using your computer monitor.

Operation

Keep the monitor out of direct sunlight and away from stoves or any other heat source.

Remove any object that could fall into ventilation holes or prevent proper cooling of the monitor’s electronics.

Do not block the ventilation holes on the cabinet.

When positioning the monitor, make sure the power plug and outlet are easily accessible.

If turning off the monitor by detaching the power cable or DC power cord, wait for 6 seconds before attaching the power cable or DC power cord for normal operation.

Please use approved power cord provided by Philips all the time. If your power cord is missing, please contact with your local service center. (Please refer to Customer Care Consumer Information Center)

Do not subject the monitor to severe vibration or high impact conditions during operation.

Do not knock or drop the monitor during operation or transportation.

Maintenance

To protect your monitor from possible damage, do not put excessive pressure on the LCD panel. When moving your monitor, grasp the frame to lift; do not lift the monitor by placing your hand or fingers on the LCD panel.

Unplug the monitor if you are not going to use it for an extensive period of time.

Unplug the monitor if you need to clean it with a slightly damp cloth.The screen may be wiped with a dry cloth when the power is off. However, never use organic solvent, such as, alcohol, or ammonia-based liquids to clean your monitor.

To avoid the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain, water, or excessive moisture environment.

If your monitor gets wet, wipe it with dry cloth as soon as possible.

If foreign substance or water gets in your monitor, please turn the power off immediately and disconnect the power cord. Then, remove the foreign substance or water, and send it to the maintenance center.

Do not store or use the monitor in locations exposed to heat, direct sunlight or extreme cold.

In order to maintain the best performance of your monitor and use it for a longer lifetime, please use the monitor in a location that falls within the following temperature and humidity ranges.

o Temperature: 0-40°C 32-95°F

o Humidity: 20-80% RH

1

Image 3
Contents 220S2 220S2plus Table of Contents Safety precautions and maintenance Temperature 0-40C 32-95F Humidity 20-80% RHOperation Notational Descriptions Weee Installation Package contents 220S2/220S2 plus Setting up the monitorBasic and simple instruction on the control keys Physical Function Tilt Height adjustment220S2 plus Resolution notification OSD MenuRemove Base Stand and Base Remove the Base Stand 100mm How does it work? Why do I need it?Off No optimization by SmartImage What is it? Philips SmartControl Premium First launch -Wizard First time after installationPage Page First color Calibration Screen Run at Startup is checked On by default OptionAuto Pivot Facoty Preset can also be called from the drop down menu Task Tray Menu Enabled Philips Flat Panel Monitors Pixel Defect Policy Pixels and Sub pixelsTypes of Pixel Defects Model Ccfl LCD panel typeTFT-LCD BacklightMtbf Power On mode TypicalTypical Energy Consumption 0C to 40 CCabinet Color Black/Sliver, Black/Black Finish Texture EnvironmentalRohs YES Epeat GS,TÜV Ergo, UL/cULAutomatic power saving feature Power Management Definition Automatic PowerSavingEpeat Electronic Product Lead-free ProductBenefits of Epeat EN550241998+A12001+A22003Product also comply with the following standards Federal Communications Commission FCC Notice U.S. Only Reorient or relocate the receiving antennaTV technician for help Commission Federale de la Communication Plassering/Ventilasjon Polish Center for Testing and Certification NoticePaikka/Ilmankierto VaroitusErgonomie Hinweis nur Deutschland Nur original-Ersatzteile verwendet werdenAchtung Beim Aufstellen Pacific Eastern EuropeLatin America North AmericaWhat is excluded? Page Just a click away Just a phone call away Dear CustomerCzech Republic Estonia Fujitsu Services OUBelarus BulgariaSlovakia Romania TurkeySerbia & Montenegro UkraineCompany Name PT. Gadingsari elektronika Prima South Africa AfricaPage Where can I GET More INFORMATION? WHO is COVERED? What is COVERED?What is EXCLUDED? Your warranty does not coverTo GET Warranty Service in Canada Your International Guarantee Dear Customer Screen says TroubleshootingReconnect your USB peripherals Audio problemRun Windows Update and updated monitor and/or video driver Page Q7 How should I clean the LCD surface? Q9 Can the Philips LCD Monitor be mounted on the wall? Color TemperatureThe six settings
Related manuals
Manual 53 pages 33.57 Kb