Troubleshooting
Display position is incorrect
Image vibrates on the screen
Vertical flicker appears
Horizontal flicker appears
The screen is too bright or too dark
An
●Press the Auto button.
●Adjust the image position using the Phase/Clock of Setup in OSD Main Controls.
●Check that the signal cable is properly connected to the graphics board or PC.
●Press the Auto button.
●Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls.
●Press the Auto button.
●Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls.
●Adjust the contrast and brightness on
the screen becomes dark or begins to flicker, please contact your sales representative).
●If an image remains on the screen for an extended period of time, it may be imprinted in the screen and leave an after- image. This usually disappears after a few hours.
●Always activate a moving screen saver program, a periodic screen refresh application or turn on the Pixel Orbiting function when displaying unchanging or static content on your LCD monitor for any extended period.
●To activate the Pixel Orbiting function:
1.Press the OK button to bring up the OSD (On- screen Display) menu.
2.Select Setup, then choose the Pixel orbiting function setting.
3.Use the cursor Up/Down button; select "on" to