Philips 201B user manual White Color Temperature

201B Product Information

• Video dot rate	261 MHz
• Input impedance
- Video	75 ohm
- Sync	2.2 kOhm
• Input signal	0.7 Vpp
levels

•Sync input signal Separate sync Composite sync

• Sync polarities Positive and negative

WHITE COLOR TEMPERATURE
Chromaticity CIE coordinates:
• at 9300 K	x = 0.283 / y = 0.297
degrees
• at 6500 K	x = 0.313 / y = 0.329
degrees
• at 5500 K	x = 0.332 / y = 0.347
degrees

* These information are subject to change without notice.

RETURN TO TOP OF THE PAGE

Automatic Power Saving

If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. And if an input from a keyboard, mouse or other input device is detected, the monitor will automatically "wake up". The following table shows the power consumption and signaling of this automatic power saving features:

201B10:

Power Management Definition

VESA's Mode	Video	H-sync	V-sync	Power Used	Power	LED color
					Saving (%)
ON	Active	Yes	Yes	< 104W	0 %	Green
Stand-by	Blanked	No	Yes	< 3W	97%	Yellow
Suspend	Blanked	Yes	No	< 3W	97%	Yellow
OFF	Blanked	No	No	< 3W	97%	Yellow

file:///D/rita/LF2/LF2/LFa1/multi_manual/english/201B/PRODUCT/PRODUCT.HTM (2 of 4) [8/29/2001 3:11:39 PM]