Troubleshooting
Troubleshooting
Safety and Troubleshooting FAQs
This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these
Common Problems solutions, contact Philips customer service representative.
Imaging Problems
Regulatory | Information | Common Problems |
Other Related Information |
| |
Having this problem
No Picture (Power LED not lit)
No Picture
(Power LED is Blue Blinking)
Screen says
Check these items
●Make sure the power cord is plugged into the power outlet and into the back of the monitor.
●First, ensure that the power button on the front of the monitor is in the OFF position, then press it to the ON position.
●Make sure the computer is turned on.
●Make sure the signal cable is properly connected to your computer.
●Check to see if the monitor cable has bent pins.
●The Energy Saving feature may be activated
●Make sure the monitor cable is properly connected to your computer. (Also refer to the Quick
●Check to see if the monitor cable has bent pins.
●Make sure the computer is turned on.
AUTO button not working properly
Imaging Problems
Display position is incorrect
●The Auto Function is designed for use on standard Macintosh or
●It may not work properly if using nonstandard PC or video card.
●Press the Auto button.
●Adjust the image position using the Phase/Clock of Setup in OSD Main Controls.
file:///H/OEM MODELS/Philips 2008/CD MANUAL/190SW9 EDFU/190SW9 EDFU/lcd/manual/ENGLISH/190S9/safety/saf_troub.htm 第 1 頁 / 共 3 [2008/5/29 上午 11:35:17]