Philips 150X user manual Imaging Problems

Page 44

Troubleshooting

AUTO button not working properly

Imaging Problems

Display position is incorrect

Image vibrates on the screen

Vertical flicker appears

Horizontal flicker appears

The screen is too bright or too dark

The Auto Function is designed for use on standard Macintosh or IBM-compatible PC running Microsoft properly Windows.

It may not work properly if using non-standard PCs or video card.

Push the Auto button.

Adjust the image position using the Horizontal Position &/or Vertical Position in the second Window

Check that the signal cable is properly connected to the graphics board or PC.

Push the Auto button.

Eliminate the vertical bars using the Clock Adjustment in the first Window

Push the Auto button.

Eliminate the horizontal bars using the Phase Adjustment in the First Window

Adjust the contrast and brightness using the First Window. (The backlight of the LCD monitor has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer.

file:///D/Philips LCD/english/150X/SAFETY/saf_troub.htm (2 of 3) [4/18/2001 9:12:54 AM]

Image 44
Contents Page Installation Locations Safety and Troubleshooting InformationSafety precautions and maintenance Correct handling of the monitor Return to TOP Notational Descriptions About This GuideOther Documents You May Need Return to TOP Product Information Product FeaturesTechnical Specifications Audio Resolution & Preset Modes Automatic Power SavingPhysical Specifications Signal Pin AssignmentDVI-I Pin Assignment Views No Video Input Entering Sleep Mode Page Installing your LCD Monitor Rear View Side View Return to TOP Optimizing Performance On-Screen Display Description of the On Screen DisplayAnalog signal input OSD TreePage Digital signal input Return to TOP Customer Care & Warranty North America Canada USAGlossary BNC connectionSUB USB LCD Liquid Crystal Display Vertical refresh rate Return to TOP Download and Print Download instructionsInstalling FPadjust Program Printing instructionsFAQs Frequently Asked Questions General FAQsFAQs Frequently Asked Questions Page Screen Adjustments Compatibility with other Peripherals LCD Panel Technology FAQs Frequently Asked Questions Ergonomics, Ecology, and Safety Standards Return to TOP Troubleshooting Common ProblemsImaging Problems Return to TOP Regulatory Information TCO Development Unit Philips Federal Communications Commission FCC Notice U.S. Only EN 55022 Compliance Czech Republic Only Varning Earthed How to connect a plug Information for Users outside the U.S Other Related InformationInformation for Users in the U. S Philips Pixel Defect Policy Philips Flat Panel Monitors Pixel Defect PolicyProximity of Pixel Defects Return to TOP Connecting to Your PC Connecting to Your PC Connecting to Your PC Connecting to Your PC Return to TOP Getting Started Getting StartedOSD Controls BrightnessLanguage Adjust Position Brightness & Contrast Brightness & Contrast Video Noise not available on all monitors OSD Controls Adjust COLORanalog mode OSD Controls OSD Controls OSD Settings OSD Controls Product Information Reset to Factory Settings Monitor, Reset to Factory Settings is your last selection Input Selection not available on all monitors Close Main Controls Page Your International Philips F1rst Choice Warranty Thank you for purchasing this Philips monitorYour International Guarantee Limited Warranty Computer Monitor WHO is COVERED? What is COVERED?Before Requesting Service Philips Customer Care Center, P. O. Box 2976, Longview, TX