Samsung MM-B9, AH68-01018B Setting the Clock, Viewing the Various Functions on, Your System

Viewing the Various Functions on	Setting the Clock
Your System

GB

You can view the various functions available on your system.

1 Press the Demo button.

Result: The various functions available are listed in turn on the display.

Your system is equipped with a clock which allows you to turn your system on and off automatically.

You should set the clock:

When you first purchase the micro component system

After a power failure After unplugging the unit

All these functions are described in detail in this booklet. For instructions on how to use them, refer to the appropriate sections.

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

2 To cancel this function, press Demo again.	1
	2

				3
			Po	4
Demo	REC/Pause	TUNER/Band
			Surr
On/Standby		C D
	CD Synchro		Sle
AUX		TAPE		5
	CD Repeat		Mon
		Tuning Mode
Phones				6
		FRONT LOADING MECHANISM

Switch the system on by pressing On/Standby ( ) .

Press Timer/Clock twice.

Result: CLOCK is displayed.

Press Program/Set.

Result: The hour flashes.

To...Press...

Increase the hours Decrease the hours

When the correct hour is displayed, press Program/Set. Result: The minutes flash.

To...Press...

Increase the minutes

Decrease the minutes

7	When the correct time is displayed, press Program/Set.
	Result: The clock starts and is displayed, even when the system is in
	standby mode.
	You can display the time, even when you are using another
	function, by pressing Timer/Clock once.
	You can use the Multi Jog to instead	/	button in step
	4,6.

Timer Timer/

On/Off Clock

12

EQ/S.Bass Sleep Aux

TAPE

CD SYNC.	REV.	Random	Counter
	Mode		Reset
		CD

3,5,7		+10
Repeat
Program/	VOL.	Band
Set
	Tuning
	Mode
4,6	VOL.	4,6

10