Samsung AH68-01018B Programming the Order of Playback, Checking or Changing Programmed Tracks

Programming the Order of Playback

You can decide:

The order of the track desired to listen

The track not desired to listen

A maximum of up to 24 order of tracks desired to listen may be programmed.

Before selecting the track, the CD player should be stopped.

This function may be used simultaneously with the CD Repeat function.

1	If the CD function is selected, stop the player by pressing						button .
2	Load the selected CDs.
3	Press Program/Set.
	Result: The following indications are displayed:
		(01 = Program no., -- -- = Track no. on the disc)
4	Select the required track by pressing:
		to move back through the tracks
5		to move forward through the tracks
	Press Program/Set to confirm your selection.
	Result: The selection is stored and is displayed.
6	To select other tracks, repeat Steps 4 to 5.
7	Press CD (		) to listen to the track selection in the order programmed.
8
	To...			Press...
	Listen to the current track again				once
	Listen to the previous track				twice
	Listen to the next track				once
	Skip forwards or backwards				or	the appropriate
	one or more tracks			number of times
9	To cancel the selection, press			button.

Once if the compact disc player is stopped

Result: PROGRAM is no longer displayed.

If you open the compartment, the selection is cancelled.

You can also use the / buttons to select the required tracks in step 4, 8.

CD SYNC.	REV.		Counter
	Mode	Random Reset
1, 9 CD
Repeat		7	+10
3,5
Program/	VOL.		Band
Set4,8			4,8

Tuning

Mode

VOL.

Checking or Changing Programmed Tracks

GB

You can check or change your selection of tracks at any time.

1	Press	once if you have started listening to the selection.
2	Press Program/Set button twice.
	Result: The following indications are displayed:

(01 = Program no., – – = Track no. on the disc)

If you have already programmed 24 tracks, Check is displayed instead of P when you press Program/Set.

3	Press Program/Set one or more times until the track to be changed
	is displayed.
4	Press	or		to select a different track.
5	Press Program/Set to confirm your change.
6	Press CD (		) to start listening to the selection.
	Result: The first track selected is played.

	TUNER/Band	Power	Sound
		Surround	Mode
	C D	Sleep
	TAPE		Open/Close
4		Mono/ST
			S.Bass
	Tuning Mode		Level

4

Multi Jog

1	4
FRONT LOADING MECHANISM

TAPE

CD SYNC.		REV.	Random	Counter
		Mode		Reset
	1	CD
2,3,5				+10
Repeat			6
Program/		VOL.		Band
Set 4				4

Tuning

Mode

VOL.

13