Samsung MAX-VS530 Listening to a Cassette CD Synchro Record Feature, Recording a Compact Disc

Listening to a Cassette CD Synchro Record Feature

GB

	Always treat your cassettes with care; refer, if necessary, to
	the section entitled “Precautions When Using Audio Cassettes”
	on page 26.
1	Switch the system on by pressing the Standby/On button.
2	Select the TAPE function by pressing TAPE.
3	Open either cassette deck 1 or 2 by pushing and releasing the deck
4	cover where Push Eject (	) is written.
	Insert the pre-recorded cassette with the open edge of the tape
	facing downward.
5	Close the deck by pushing on it until it clicks into place.
	Result: Depending on the deck selected, the 1 or 2 indication is

displayed in front of the counter number.

If you insert a cassette in both decks, the system selects the deck in which you inserted the second cassette.

You can record a compact disc on a cassette in two different ways:

Synchronised recording

Direct recording

This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice.

1	Switch the system on by pressing Standby/On.
2	Insert a blank cassette in Deck 2.
3	Select the CD function by pressing VCD/CD on the front panel.
4	Load a compact disc.
5	Select the required disc.
6	Select the required track and press CD Synchro or press CD
	Synchro directly to start recording at the beginning of the disc.
	Result: “REC” and “CD-SYNC”are displayed and recording starts.
7
	To stop...	Press ...
	Recording and playing the compact disc

6	If you have inserted two cassettes, press Deck 1/2 on the front panel
	or directly the Deck 1/2 button on the remote control to select the
	cassette to be played.
	Result: Depending on the deck selected, the TAPE 1 or TAPE 2
	indication is displayed.
7
	To listen to...	Press ...
	Side A	TAPE (	) once	DECK 1 and DECK 2
	Side B	TAPE (	) twice	DECK 2 Only

Result: The cassette starts playing.

When the cassette is stopped, select one of the following functions as required.

8 To... Press ...

Rewind the cassette 9 Fast-forward the cassette

When you have finished the function, press TAPE on the remote control or on the front panel to stop.

1

3

7

6

Recording a Compact Disc

The direct recording mode enables you to start recording with any track on the compact disc.

You can only record on cassettes in Deck 2.

You do not need to adjust the volume, as it has no effect on the recording.

		1
		2
1		3
		4
		5
8	8	6
2,7		7
6	9
		8
		9

Switch your system on by pressing Standby/On.

Insert a blank cassette in Deck 2.

Select the CD function by pressing VCD/CD on the front panel.

Load the compact disc.

Select the required disc.

Select the required track on the compact disc and press on the front panel or on the remote control to set the compact disc player to Pause mode.

Press the REC/Pause.

Result: REC is displayed .

Press the to start playing the track.

Result: The track is recorded on the cassette.

When you have finished recording, press TAPE on the remote control or on the front panel to stop recording.

1

3,6,8

9

7

20