Samsung MAX-VS530 instruction manual Timer Function, Cancelling the Timer

Timer Function

GB

The timer enables you to switch the system on or off at spe- cific times.

Example: You wish to wake up to music every morning.

If you no longer want the system to be switched on or off auto- matically, you must cancel the timer.

Before setting the timer, check that the current time is correct.

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1	Switch the system on by pressing Standby/On.
2	Press Timer/Clock until	TIMER is displayed.
3	Press Enter.

Result: ON TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch-on time already set; you can set the timer switch-on time.

4 Set the timer switch-on time.
a	Set the hour by pressing the	/		buttons.
b	Press Enter.
	Result: The minutes flash.
c	Set the minutes by pressing the		/		buttons.
d	Press Enter.

Result: OFF TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch-off time already set; you can now set the timer switch-off time.

5 Set the timer switch-off time.

aSet the hour by pressing the / buttons.

bPress Enter.

Result: The minutes flash.

cSet the minutes by pressing the / buttons.

dPress Enter.

Result: VOL XX is displayed, where XX corresponds to the vol- ume already set.

6	Press Tuning Down and Up to adjust the volume level and press
	Enter.
	Result: The source to be selected is displayed.
7	pressing the		/	buttons to select the source to be played
	when the system switches on .
	If you select...			You must also...
	TAPE (cassette)			Insert a recorded cassette in one of the
				decks before setting the system to standby.
	TUNER (radio)			a Press Enter.
				b Select a preset station by pressing the
					/	buttons.
	VCD/CD (compact disc)			a Load one or more compact discs.
				b Select the required disc.
8	Press Enter to confirm the timer.
9	Press Standby/On to set the system to standby mode.
	Result:	is displayed to the bottom left of the time, indicating that

the timer has been set. The system will switch on and off automati- cally at the required times.

If the timer switch on and off times are identical, the word ERROR is displayed.

1,9
2
	3,4,5,6,7,8
4,5,6,7	4,5,6,7

Cancelling the Timer

After having set the timer, it will start automatically as shown by the TIMER indication on the display. If you no longer wish to use the timer, you must cancel it.

You can stop the timer at any time (system on or in standby mode).

To...	Press Timer On/Off...
Cancel the timer	Once.
	Result:	is no longer displayed.
Restart the timer	Twice.
	Result:	is displayed again.

22