![](/images/new-backgrounds/1030272/3027253x1.webp)
Precautions When Using Compact Discs
Handle your compact discs with care. Always hold them by the edges to avoid leaving fingerprints on the shiny surface.
When you have finished playing a compact disc, always put it back in its case.
Do not fix paper or adhesive tape to the discs and do not write on the label.
Clean them with a
Store your compact discs in a clean place, out of direct sunlight, where they will not be exposed to high temperatures.
Always use compact discs marked
COMPACT .
DIGITAL AUDIO
Before Contacting the After-Sales Service
GB
It always takes a little time to become familiar with a new appliance. If you have any of the problems listed below, try the solutions given. They may save you the time and inconvenience of an unnecessary service call.
Problem | Checks/Explanation |
| • The main lead is not correctly plugged into |
| a wall socket or the wall socket is not |
| switched on. |
The system does not work | • The remote control batteries need replacing |
| or the polarity has not been respected. |
| • The On/Standby button has not been |
| pressed. |
Precautions When Using Audio Cassettes
Check that the tape in the cassette is sufficiently taught.
To prevent erasing a cassette that you wish to keep, remove the safety tab on the upper edge of the cassette. To record a cassette, where the tab has been broken, simply cover the opening with adhesive tape.
When you have finished playing a cassette, always put it back in its case.
G
E
N
E
RThere is no sound
A
L
The Timer does not work
In case it does not work, even the action is taken as above.
C
D
/The compact disc player does not M start playing
P
3
• The volume has been completely turned |
down. |
• The correct function (TUNER, CD, TAPE, |
AUX) has not been selected. |
• You have connected a set of earphones. |
• The loudspeaker wires have been |
disconnected. |
• The Mute button has been pressed. |
• The timer has been stopped by pressing |
Timer On/Off. |
• Press the S.BASS button for 5 seconds in |
power ‘OFF’(standby), then it is returned the |
original position (RESET) |
• The CD function has not been selected. |
• The disc has been inserted face down or is |
either dirty or scratched. |
• The laser sensor is dirty or dusty. |
• The system has not been installed on a flat, |
horizontal surface. |
• Condensation has formed in the player; |
leave the system in a warm, airy room for at |
least one hour. |
Store your cassettes in a clean place, out of direct sunlight, where they will not be exposed to high temperatures.
Avoid using
C D
C
The
• Use the PC to confirm if the extension is |
*.mp3. |
• The TAPE function has not been selected. |
A
S The tape does not start playing
S
E
T
TThe volume falls off
EThe cassette is not erased correctly
SThere is excessive wow and flutter
R
A
DReception is poor or no radio
Istations are received at all
O
• The cassette has not been inserted correctly. |
• The cassette player has not been closed. |
• The tape is either slack or broken. |
• The audio heads are dirty. |
• The rollers or drive capstans are dirty. |
• The tape is worn. |
• The TUNER function has not been selected. |
• The radio frequency has not been correctly |
selected. |
• The aerial has been disconnected or is not |
facing the right way. Turn it until you find the |
best orientation. |
• You are in a building that blocks radio |
waves; you must use an outside aerial. |
If the above guidelines do not allow you to solve the problem, take a note of:
The model and serial numbers, normally printed on the rear of the system
Your warranty details
A clear description of the problem
Then contact your local dealer or SAMSUNG
27