Connecting to an External Source
The auxiliary input can be used to take advantage of the sound quality of your
Examples: 
A television
A video disc player
A
To connect the external source, the source must have an audio output. In addition, you need an RCA connection cable.
1 Set the system to standby mode and disconnect it and the external source from the main.
2 Connect the audio cable to the rear of the
Connect the... | To the connector marked... |
Red jack | R (right) |
White jack | L (left) |
| For optimum sound quality, do not invert the right and left | |
| channels. |
|
3 | Plug the system back into the main socket and press On/Standby to | |
| switch it on. |
|
4 | Select the AUX source by pressing AUX. | |
| Result: AUX is displayed. | |
5 | Switch the external source on. | |
6 | Adjust the volume and balance as required: | |
| Volume | Equalizer |
Example: You can watch a film and take advantage of stereo sound provided that the original sound track is in stereo (as if you were in a cinema).
SUBWOOFER | MAIN SPEAKER | ||
| (8Ω ) |
| (4Ω ) |
R | L | R | L |
RL
AUX IN
VOLTAGE
SELECTOR
VIDEO OUT
AUDIO OUT
RL
Connecting to the Equipment
GB
Using the Audio Cord, Connect the Audio Output Terminals (Left, Right) of the System with the Audio Input Terminals (Left, Right) of the Video Input Cassette Recorder, so as to Record VCD.
Using the Video Cord, Connect the Video Output Terminal of the system with the Video Input Terminal of TV.
Turn on the TV and Select the Video mode by pressing the TV/VIDEO SELECT button to the VIDEO Position.
Please Pay Attention not to Connect the Audio Output Terminals (left, right) of the System with the Audio Input Terminal of TV.
| R | L |
| AUX IN |
|
| VOLTAGE |
|
| SELECTOR |
|
| VIDEO OUT |
|
| AUDIO OUT |
|
| R | L |
AMPLIFIER | TV | |
AUDIO INPUT | VIDEO INPUT | |
R | L |
|
9