Samsung MAX-T35 Setting the Clock, Listening to a Compact Disc, Turn the Multi JOG knob to

6

5

4

If you wish to start playing a disc directly, you can also proceed as follows.

) button

Close the compartment by pressing the OPEN/CLOSE( again.

If you wish to load a third compact disc, press the DISC CHANGE button on the front panel (or DISC SKIP on the remote control). Result: The carrousel rotates by 120°.

Check that the compact disc has been correctly inserted in the holder before closing the compartment.

Press the OPEN/CLOSE( ) button on the front panel. Result: The compartment opens.

Switch the system on by pressing STANDBY/ON.

1

2

3 Place one or two discs in the front slots of the carrousel, with the label on the discs facing upwards.

Loading and Changing Compact Discs

The CD disc changer can contain up to three 12 cm or 8 cm compact discs without using an adapter.

Never force the compact disc carrousel when opening and closing the compartment.

Never press down or place objects on the carrousel.

Always treat your compact discs with care; refer, if necessary, to the section entitled “Precautions When Using Compact Discs” on page 23 .

DEMO/DIMMER function Setting the Clock

Listening to a Compact Disc

All functions available on the system can be viewed on the

GB display and the display's brightness can be switched between "on" and "off".

1	Press the DEMO/DIMMER button.
	Result: All functions available on the system appear on the front
	panel display.
	Each of these are explained in detail in this guide. Please refer to
	the relevant section.
2	Press the DEMO/DIMMER button again.
	Result: The Dimmer function is selected and the display darkens.
3	Press the DEMO/DIMMER button once again to brighten the front
	panel display.

A display brightness control can only be performed while the system power is on.

Your system is equipped with a clock which allows you to turn your system on and off automatically.

You should set the clock:

When you first purchase the mini-compact system

After a power failure

After unplugging the unit

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1	Switch the system on by pressing STANDBY/ON.
2	Press TIMER/CLOCK twice.
	Result: CLOCK is displayed.
3	Press ENTER.
	Result: The hour flashes.
4
	To...	Turn the MULTI JOG knob to the...
	Increase the hours	Right
	Decrease the hours	Left
5	When the correct hour is displayed, press ENTER.
	Result: The minutes flash.
6
	To...	Turn the MULTI JOG knob to the...
	Increase the minutes	Right
	Decrease the minutes	Left
7	When the correct time is displayed, press ENTER.
	Result: The clock starts and is displayed, even when the system is in

standby mode.

You can display the time, even when you are using another function, by pressing TIMER/CLOCK once.

You can also use / buttons on the panel front or

TUNING / on the remote control to instead of MULTI

JOG knob in step 4, 6.

To play...	Press...
Disc 1	MP3/-CD /CD (	) or Disc 1
Disc 2	Disc 2
Disc 3	Disc 3

Result: The compartment closes automatically and the disc selected starts playing.

To change or unload the compact disc changer, repeat Steps 2 to 5.

Keep the compartment closed whenever you are not using it, to prevent dust from entering.

GB

This unit has been designed to playback the CDs: Audio CD, CD Text, CD-R and CD-RW,MP3/WMA-CD.

When you have loaded at least one compact disc into the player, you can start listening to it.

Continued use of irregular shape CDs (heart-shape, octagonal, etc.) can damage the unit.

1	Switch the system on by pressing Standby/on.
2	Select the CD function by pressing MP3-CD/CD(		) .
3	Load one or more discs.
4	Press MP3-CD/CD (	) on the front panel or	on the remote
	control.

If you have loaded more than one compact disc, they will be played in turn.

Adjust the volume as required by:

5 Turning the VOLUME knob on the front panel or

Pressing the VOLUME + or - buttons on the remote control

6 To pause temporarily during playback, press MP3-CD/CD ( ).

Press MP3-CD/CD( ) again to continue disc playback.

7 Press when you want to stop playback.

When playing a disc, you can load new discs without stopping the current one. To do so, open the compartment by pressing Disc Change and load new discs in the other two vacant slots (not the one containing the disc that you are play- ing). You cannot rotate the carrousel during playback.

When no discs are loaded, the “NO DISC” indication is dis- played.

The CD player stops automatically after playing the three discs, if the CD REPEAT function has not been selected.

1
4,6	4,6	4,6
	2	3,5,7

8

You can load or unload compact discs when the radio, tape or auxiliary source function is selected.

5	4	2,5
1
5

1

2,4,6

5

7

When playing a CD-R or CD-RW

User-edited CD-Rs (Recordable)and CD-RWs (Rewritable) can be played back only if they are already “finalized”.

You can play back your original CD-Rs or CD-RWs recorded in music CD format.(However,they may be played back depending on their characteristics or recording conditions.)

Before playing back CD-Rs or CD-RWs, read their instructions or caution carefully.

Some CD-Rs or CD-RWs may not be played back on this unit because of their disc characteristics, damage or stain on them,or if the player’s lens is dirty.

CD-RWs may require a longer readout time.(This is cause by the fact that reflectance of CD-RWs is lower than for regular CDs.)

9