Samsung MAX-T35 Programming the Order of CD Play- back, Checking or Changing Programmed CD Tracks

15 FM stations

15 AM stations

Switch the system on by pressing STANDBY/ON. Select the TUNER function by pressing TUNER.

Programming the Order of CD Play- back

GB

You can decide:

The order in which you listen to the tracks on the discs loaded

Which tracks you do not wish to listen to

You can program up to 24 tracks.

You must stop the compact disc player before selecting the tracks. This feature can be combined with the Repeat function.

1	If the CD function is selected, stop the player by pressing	.
2	Load the selected CDs.
3	Press PROGRAM.
	Result: The following indications are displayed:

(01 = Program no., PR1 = Disc no., – – = Track no. on the disc)

4	If necessary, select the disc containing the required track by pressing
	the corresponding DISC (1, 2, 3) button.
5	Select the required track by turning the MULTI JOG knob:
	To the left to move back through the tracks

To the right to move forward through the tracks

6 Press PROGRAM to confirm your selection.

Result: The selection is stored and	is displayed.
7 To select other tracks, repeat Steps 4 to 6.

8 Press MP3-CD/CD( ) to listen to the track selection in the order programmed.

9	To...	Turn the MULTI JOG knob...
	Listen to the current track again	One notch to the left
	Listen to the previous track	Two notches to the left
	Listen to the next track	One notch to the right
	Skip forwards or backwards one	The appropriate number of
	or more tracks	notches to the right or to the
		left

10 To cancel the selection, press .

Once if the compact disc player is stopped Result: PRGM is no longer displayed.

If you open the compartment, the selection is cancelled.

If you select the number of a disc which is not loaded or a track which does not exist on the CD, the selection skips to the next programmed track.

You can also use the / buttons to select the required tracks in step 5, 9.

	4
	8
5,9	5,9	5,9
	1,10
		3,6
14

Checking or Changing Programmed CD Tracks

You can check or change your selection of tracks at any time.

1 Press once if you have started listening to the selection.

2 Press PROGRAM.

Result: The following indications are displayed:

(CH = Check, 01=Program No, CH1 = Disc No, – – = Track No on the disc)

If you have already programmed 24 tracks, CH is displayed instead of PR when you press PROGRAM.

3 Press PROGRAM again.

Result: The first track selected is displayed, together with the letter CH (Change).

4	Press PROGRAM once or more times until the track to be changed is dis-
	played.
5	If necessary, press the corresponding Disc (1, 2, 3) button to change discs.
6	Press	and	or turn MULTI JOG to select a different track.
7	Press PROGRAM to confirm your change.
8	Press MP3/CD-CD (
				) to start listening to the selection.
	Result: The first track selected is played.

	5
	8
6	1
	6
	6
	2,3,4,7

REC / PAUSE	TAPE 1/2	COUNTER RESET
	TAPE

	1	8
6		6

MP3-CD / CD

MUTE

TUNING

VOLUME/ALBUM

Searching for and Storing the Radio Stations

You can store up to:

1

2

3	Select the required frequency band by pressing TUNER (BAND)
	again on the front panel or TUNER (BAND) on the remote control.
	Result: The appropriate indication is displayed:
		FM		Frequency Modulation
		AM(MW)		Medium Wave
4
		To search for a		Press TUNING MODE
	station...
	Manually			Once or more times until MANUAL
				is displayed.
	Automatically			Once or more times until AUTO is
				displayed.
5 Select the station to be stored by:
		Turning the MULTI JOG knob to the right or to the left to increase
		or decrease the frequency respectively
		or
		Pressing TUNING	or	on the remote control

To scroll through the frequencies faster when searching manually, hold down the TUNING Down or Up buttons.

The automatic search procedure may stop on a frequency that does not correspond to a radio station. If this happens, use the manual search mode.

6 Adjust the volume by:

Turning the VOLUME knob on the front panel or

Pressing the VOLUME + or – buttons on the remote control

7 Select the FM stereo or mono mode by pressing MO/ST.

8 If you do not want to store the radio station found, revert to Step 4 and search for another station.

Otherwise:

aPress TUNER MEMORY.

Result: The PRGM is displayed for a few seconds.

bPress TUNING Down and Up to assign a program number .

cPress TUNER MEMORY to store the radio station.

Result: PRGM is no longer flashed and the station is stored.

9 To store any other radio frequencies required, repeat Steps 3 to 8.

The PROGRAM function can be used to assign a new station to an existing program number.

GB

2,3
1		6
5,8	5,8	5
4
	7	8

6	MP3-CD / CD
	5,8
	MUTE
VOLUME	TUNING
	/ALBUM
6	5,8
SURROUND MODE	SOUND MODE TUNING MODE 4
	+10

In Tuner mode

In manual tuning mode, you can use MULTI JOG or / button on the panel front to manual search a radio station.

During Tuner auto searching, press button to stop auto searching.

In Preset tuning mode, you can use MULTI JOG or / button on the panel front to search a stored radio station.

15