Listening to Radio
You can listen to the chosen band (FM, (SW1,2),MW broadcast stations) by using either the automatic or manual tuning operation.
Presetting Stations
You can store up to:
15 FM stations
5 MW stations or 15 FM stations | 15AM stations |
5 SW1 stations
5 SW2 stations
Remote Control Unit
Example: Presetting FM 89.1 in the memory
1 Press TUNER/
BAND button.
•The selection toggles back and forth between "FM
➝(SW1,2) ➝MW" each time the TUNER(BAND) button is pressed.
2 Tune in to the desired station.
| Press |
|
|
| button to select | |
Automatic Tuning 1 | ||||||
|
| |||||
| the preset station. | |||||
| ||||||
Automatic Tuning 2 | Press and hold | button |
to automatically search the band. | ||
Manual Tuning Briefly press 
button to increase or decrease the frequency incrementally.
Press the
1TUNER(BAND) button and select the FM band.
•Each time the button is pressed, the band switches between "FM ➝ (SW1,2) ➝MW".
kHz
MHz
2 Press 
to select "89.10".
•Refer to Step 2 on page 41 to automatically or manually tune in to a station.
kHz
MHz
3 Press the TUNER MEMORY button.
•“PROGRAM” flashes in the display.
PROGRAM
kHz
MHz
Main Unit
Press the TUNER/BAND
1 button to select the desired band (FM, (SW1,2),MW).
2 Select a broadcast station.
Automatic Tuning 1 Press the STOP ( 
) button
to select PRESET and then
press 
button or turn Multi Jog Knob to select the preset station.
Automatic Tuning 2 Press the STOP ( 
) button to
select "AUTO" and then press button or turn
automatically search the band.
Manual Tuning Press STOP ( 
) to select MANUAL and then briefly
press 
or turn Multi Jog Knob to tune in to a lower or higher frequency.
4 | Press |
|
|
| to |
|
| ||||
|
| ||||
select preset |
|
| |||
| number. |
|
| ||
|
|
|
|
|
|
•You can select between 1 and 15.
PROGRAM
kHz
MHz
5 | Press the TUNER | 6 |
| To preset another |
| station, repeat | |||
MEMORY button. |
| |||
| steps 2 to 5. | |||
|
|
|
|
|
• Press the TUNER MEMORY button before | RADIO | |
‘PROGRAM’ disappears from the display. | OPERATION | |
• ‘PROGRAM’ disappears from the display | ||
| ||
and the station is stored in memory. |
|
kHz | Note |
MHz |
|
• When listening AM/SW , 
(Dolby Pro Logic II) button does not work.
Press MONO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
57 | • In a poor reception area, select MONO for a clear, |
|
To tune in to a preset station, press 
on the remote control to select a channel.
58