Samsung MAX-DC20800 Setting the Clock, Disc Playback, Selecting a CD in the Disc changer

Setting the Clock

For each step, you have a few seconds to set the required options.

If you exceed this time, you must start again.

Disc Playback

Selecting a CD in the Disc changer

Switch the system

1 on by pressing POWER button.

2 Presstwice. TIMER/CLOCK

•CLOCK is displayed.

3 Press ENTER. The hour flashes.

•Increase the hours :

•Decrease the hours :

The CD function is automatically selected when Disc Skip is pushed.

To select a specific disc, press the corresponding DISC (1, 2, 3) button on the front panel or DISC SKIP on the remote control, until the required disc indicator flashes.

Result: All the discs will be played in turn, starting with the one selected.

•If you use the DISC (1, 2, 3) function when listening to the radio or to a tape, the

When the correct

4 hour is displayed, press ENTER. The minutes flash.

•Increase the minutes :

•Decrease the minutes :

5	When the correct
	time is displayed,
	press ENTER.

•"TIMER" appears in the display.

•The current time is now set.

Note

•You can display the time, even when you are using another function, by pressing TIMER/CLOCK once.

system switches automatically to the CD mode.			OPERATION
• If the disc selected is not loaded, the next disc is played automatically.
DVD-
DVD AUDIO	VCD	CD

•Playback starts automatically.

MP3 JPEG DivX

• Playback starts automatically.

Note	•You can also		use Multi-Jog or	button on	the panel front
	instead of	,	buttons in step 3,4.

Checking the Remaining Time

Press the REMAIN button.

•For checking the total and remaining time of a title or chapter being played.

Each time the REMAIN button is pressed

• If the TV is on, a list of MP3s on the CD will appear on the TV screen.

Note	• Depending on the content of the disc, the initial screen may appear different.
	• Depending on the recording mode, some MP3-CDs cannot be played.
	• Table of contents of a MP3-CD varies depending on the MP3 track format recorded
	on the disc.

To stop playback,

press STOP during playback.

DVD

TITLE ELAPSED
	VCD
TITLE REMAIN
	CD
CHAPTER ELAPSED

CHAPTER REMAIN

TRACK ELAPSED
TRACK REMAIN	DVD-

AUDIO

TOTAL ELAPSED	MP3
TOTAL REMAIN
	TRACK ELAPSED

GROUP ELAPSED

GROUP REMAIN

TRACK ELAPSED

TRACK REMAIN

To temporarily pause playback, press PLAY/PAUSE during playback.

•To resume playback, press PLAY/PAUSE button again.

•If pressed once, “PRESS PLAY” is displayed and the stop position will be stored in memory. If PLAY/PAUSE

( ) button or ENTER button is pressed, playback resumes from the stop position. (This function works only with DVDs.)

•If pressed twice, “STOP” is displayed, and if

PLAY/PAUSE ( ) button is pressed, playback starts from the beginning.

TRACK REMAIN

15 16