Philips 17B2302Q appendix How to Use the On Screen Display OSD, Contrast, Brightness

Page 5

How to Use the On Screen Display (OSD)

Front Panel Controls

Contrast

To adjust your screen’s contrast, follow the steps below. Contrast is the difference between the light and dark areas on

the screen. A 100% contrast level is recommended.

1 Press the Contrast button (furthest one on the

right) on the front of the monitor.

The Contrast window appears.

2

Turn the

ROTARY knob (at the lower right- hand corner of the monitor) to adjust the contrast.

3

When finished, press the

CONTRAST

button again. The Contrast screen disappears.

Smart Help

To continue to Brightness, press the BRIGHTNESS button on the front of the monitor. Next, follow steps 2 - 3 under BRIGHTNESS.

If you do not press the CONTRAST button a second time, the Contrast window will “time out” (disappear) after five seconds. You can change this time. See page 8 for time out options.

Brightness

To adjust your screen’s brightness, follow the steps below. Brightness is the overall intensity of the light coming from the

screen. A 50% brightness level is recommended.

1 Press the Brightness button (second one

from the left) on the front of the monitor.

The Brightness window appears.

2

Turn the

ROTARY knob (at the lower right-hand corner of the monitor) to adjust the brightness.

3When finished, press the

BRIGHTNESS

button again. The Brightness screen disappears

.

Smart Help

To continue to Volume, press the VOLUME button on the front of the monitor. Next, follow steps 2 - 3 under VOLUME.

If you do not press the BRIGHTNESS button a second time, the Contrast window will “time out” (disappear) after five seconds. You can change this time. See page 8 for time out options.

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Table of Contents Introduction Introduction and SafetyBrightness Button Description of ControlsBrings up the On Screen Display Speakers or to the computerMonitor. For details Geometry Controls ThisTRAPEZOID, PARALLELOGRAM, Brightness How to Use the On Screen Display OSDContrast To go to Degauss VolumeMute Monitor Status DegaussScreen is for review only After returning to the Main MenuLanguage Power SavingCurrent selection To make other changes in the Advanced Controls windowSetting OSD TimerBring up OSD Timer screen DDC1 / 2BSync Input Select MoireAffect sharpness Nput selectedAfter returning to Main Menu 9300˚ K / 6500˚ KPress the on Screen Display button. a Green will be highlighted Next, to adjust the green When done with red, pressAfter returning to Color Temperature User 1 / UserWhen the picture is not square Horizontal Position ZoomLeft or right as you turn Otary knobVertical Position Vertical Size Horizontal SizeKnob To make other changes in the Main MenuExiting Brightness Volume, & Contrast Exit OSD & Reset from the OSDTo cancel a change made Save & Recall From a windowMicrophone Audio-in jacks Microphone Earphones jacksConnections For an IBM-compatible ComputerGlossary Automatic Power Savings Preset Resolution ModesAdditional Information Pin Assignment SpecificationsIndex When you turn on Monitor No Color or intermittent TroubleshootingSee pages 2 and 16 for details Find your video card For the right drivers
Top Page Image Contents