User Manual BDL4230E
2.2.REAR VIEW
9 |
8 |
7
| 100 mm |
| |
| 100 |
| 290.4 mm |
| Dent depth: | ||
280 mm | mm 100 | 6mm | |
| |||
| mm | 35 mm |
|
|
|
| |
| 200 mm |
| |
| 210.4 mm |
| |
1 | 2 | 3 | 4 | 5 | 6 |
1.ENTER/VIDEO SOURCE button
•Use this button to select the input source.
•When the On Screen Display menu is active, use this as the SET button.
2.MENU button
•Use this button to engage the On Screen Display menu.
•When the On Screen Display menu is active, use this button to return to the previous menu.
3. / button
• When the On Screen Display menu is active, use these as the UP/DOWN menu buttons.
• Press and hold the and buttons simultaneously for 3 seconds to lock or unlock all buttons.
4. / button
•When the On Screen Display menu is active, use these as the PLUS/MINUS menu buttons.
5.POWER button
Use this button to turn the monitor on or put the monitor to standby.
6. Power indicator
Indicates the operating status of the monitor:
-lights green when the monitor is turned on
-lights red when the monitor is in standby mode
-blinks red when the monitor enters DPMS mode
-off when the main power of the monitor is turned off
7.Mount PC installation holes
Install a mount PC using these holes and M4 screws. (Maximum load: 2kg)
8.Cable retainer installation holes Install the cable retainer using these holes.
9.Carrying handle
Use these handles when carrying the monitor by hand.
RETURN TO THE CONTENTS