Monitor ID, Ddc/Ci, Smart Power, Medium

User Manual BDL4230E

4.Press the EXIT button, and then press the PLUS button to highlight the OFF item. Press the SET button, and then press the UP/DOWN button to set the hour when the monitor will be turned off, then press the PLUS button to move to the minute slot to set the minute. If you do not want to use a power off time, select "--" for the hour slot, and "00" for the minute slot.

5.Press the EXIT button, and then press the PLUS button to highlight the INPUT item, and then press the UP/DOWN button to select an input source. If no input source is selected, the default input source (VIDEO) will be used.

6.Press the PLUS button to select what days in a week this schedule item will be take effect, and then press the SET button.

7.If you want to set up more schedule items, press the EXIT button and then repeat the steps above. A check mark in the box next to the number of the schedule item indicates that the selected schedule is in effect.

Notes:

•The selection of EVERY DAY within a schedule item takes priority over other schedules that are set up to operate weekly.

•When schedule items overlap, scheduled power on time has priority over scheduled power off time.

•If there are two schedule items programmed for the same time, then the highest numbered schedule has priority.

MONITOR ID

Set the ID number for controlling the monitor via the RS232C connection. Each monitor must have an unique ID number when multiple BDL4230E monitors are connected.

Use the PLUS/MINUS button to select a monitor ID.

DDC/CI

Choose to turn ON or OFF the DDC/CI communication function. Select ON for normal use. Use the PLUS/MINUS button to make selection.

SMART POWER

Set the monitor to reduce the power consumption automatically.

Use the PLUS/MINUS button to toggle between

• OFF

• MEDIUM

•HIGH

AUTO SIGNAL DETECTION

Choose to let the monitor detect and display available signal sources automatically.

•ON - Set the monitor to display the image automatically once a signal is connected.

•OFF - Once a signal is connected, it can only be selected manually.

Use the PLUS/MINUS button to make selection.

ADVANCED OPTION RESET

Reset all settings in the ADVANCED OPTION menu.

Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to make selection. Select YES and press the SET button to restore settings to factory preset values. Press the EXIT button to cancel and then return to the previous menu.

RETURN TO THE CONTENTS