Philips BDS4222V/00, BDS4222B user manual Troubleshooting, Symptom Possible Cause Remedy

Page 52

User Manual BDS4222B/V/R

9.2TROUBLESHOOTING

Symptom

Possible Cause

Remedy

 

 

 

 

 

No picture is displayed

1

The power cord is disconnected.

1

Plug in the power cord.

 

2

The main power switch on the back of the

2

Make sure the power switch is switched on.

 

 

monitor is not switched on.

3

Connect a signal connection to the monitor.

 

3

The selected input has no connection.

4

Press any key on your keyboard.

 

4

The monitor is in standby mode in RGB

 

 

 

 

mode.

 

 

Interference displayed on the

Caused by surrounding electrical appliances,

Move the monitor to another location to see if

monitor or audible noise is

cars/motorcycles or fluorescent lights.

the interference is reduced.

heard

 

 

 

 

Color is abnormal

The signal cable is not connected properly.

Make sure that the signal cable is

 

 

 

attached firmly to the back of the

 

 

 

monitor.

Picture is distorted with

1

The signal cable is not connected properly.

1

Make sure that the signal cable is attached

abnormal patterns

2

The input signal is beyond the capabilities of

 

firmly.

 

 

the monitor.

2

Check the video signal source to see if it is

 

 

 

 

beyond the range of the monitor. Please

 

 

 

 

verify its specifications with this monitor’s

 

 

 

 

specification section

Display image doesn’t fill up

1

If under RGB mode, the H-Size and V-Size is

1

Use H-Size and V-Size to adjust the size of

the full size of the screen

 

incorrectly set.

 

the video.

 

2

If under AV1, AV2, or Component with 480i

2

Use the WIDE key to scroll through various

 

 

input, the 4:3 WIDE mode is switched on.

 

full screen modes.

Can hear sound, but no

Improperly connected source signal cable. 1.

Make sure that both video inputs and sound

picture

 

 

inputs are correctly connected.

Can see picture but no sound

1

Improperly connected source signal cable.

1

Make sure that both video inputs and sound

is heard

2

Volume is turned all the way down.

 

inputs are correctly connected.

 

3

MUTE is turned on.

2

Use VOLUME +/- to hear sound.

 

 

 

3

Switch MUTE off by using the MUTE button.

Some picture elements do

Some pixels of the plasma display may not turn

This monitor is manufactured using an

not light up

on

 

extremely high level of precision technology;

 

 

 

however, sometimes some pixels of the monitor

 

 

 

may not display.

 

 

 

This is not a malfuction. Please see the enclosed

 

 

 

warranty card for more information.

After-Images can still be seen

A still picture is displayed for an over extended

Do not allow a still image to be displayed for an

on the monitor after the

period of time.

extended period of time as this can cause a

monitor is powered off.

 

 

permanent after-image to remain on the

(Examples of still pictures

 

 

monitor.

include logos, video games,

 

 

 

 

computer images, and images

 

 

 

 

displayed in 4:3 normal

 

 

 

 

mode)

 

 

 

 

 

 

 

 

 

 

 

..

 

 

50

Image 52
Contents Philips Business Solutions Page Table of Contents Technical Specifications Cleaning and TroubleshootingImportant Notes and Safety Instructions Safety InstructionsPage Know These Safety Symbols Cleaning & Care END-OF-LIFE DisposalFCC Compliance Statement Regularoty NoticeCanadian Compliance Statement Page Package Contents Unpacking and InstallationUnpacking Installation Notes Parts and Functions Available Functionality by Monitor TypeBasic Functionality Video Functionality Monitor Type NrFront View Rear View Video Inputs BDS4222V & BDS4222R onlyDigital DVI Input Rgbvga InputRemote Control Using ANT input BDS4222R only Connecting TV or CatvConnections to External Equipment Connecting a VCR Using Scart AV socket input BDS4222V & BDS4222R onlyUsing S-Video Input BDS4222V & BDS4222R only Using TV Input BDS4222R onlyConnecting a DVD Player Using Component Video Input BDS4222V & BDS4222R onlyConnecting External Amplified Speakers Connecting to an External AmplifierExternal Audio Connection Connecting a PC RS-2Using Rgbvga or DVI Video InputSetting Up Your Display Using Plug and Play How to Set up Your PC for Use with Monitor WindowsPage Powering on / OFF Using Front Panel or Remote ControlSelecting Signal Source Basic FunctionsVolume Adjustment Using Front Panel or Remote Control Using MuteON-SCREEN Display Menu ON-SCREEN Display StatusWidescreen Content Understanding Widescreen ModesCinerama ZoomUsing Remote Control Changing Aspect RatiosPage Picture Controls Adjusting Picture Settings Advanced FunctionsClock Phase ContrastBrightness ColorTurning On PIP or POP Mode PIP modePOP mode PICTURE-IN-PICTURE PIP / SIDE-BY-SIDE Picture POPSelecting Signal Source for Main Picture Selecting Signal Source for Sub-PictureSwapping Main and Sub-Window Changing Channels in PIP or POP Mode Changing Location of PIP ImageSelecting Color Temperature Fine Tuning Rgbvga ModeFIT Picture to Size of Monitor Sound Controls Adjusting Sound Settings BassTreble BalanceSetting Output Using OSD Menu BUILT-IN Amplification SpeakerTurning On Built-in Amplification Fixed / Variable Audio OutputSetting OSD Menu Language Power Save ModeSetting Power Save Mode OSD Menu LanguageSetting Pixel Shift Interval Information DisplayViewing Firmware Version Number Pixel Shift FunctionBURN-IN Recovery Using Burn-In RecoveryTeletext HoldReveal Text NAlarm FasttextTV Functions BDS4222R only Initial SET UP Manual Channel Search ON-SCREEN Status Display TV Mode BDS4222R only Channel EditDisplaying Status Changing ChannelsAccessing via Remote Control Accessing via OSD MenuSound Type Technical Specifications SpecificationsDVI Signal Audio SignalPin Assignments for Sub-D Connector In/ Loop Out Pin Assignments for 24-pin DVI Connector Digital onlyMax. Resolution Dimensions & WeightPower Management PB/PR for Component 1Page Cleaning and Troubleshooting CleaningFront Panel Cleaning Instructions Cabinet Cleaning InstructionsTroubleshooting Symptom Possible Cause RemedyLimited Warranty EUR What is COVERED?What is EXCLUDED? Two Year Free Labor Two Year Free PartsWhere is Service AVAILABLE? Remember Page Limited Warranty USA Make Sure YOU Keep Before Requesting Service To GET Warranty Service in Canada

BDS4222B, BDS4222V/00 specifications

The Philips BDS4222V/00 and BDS4222B are sophisticated display solutions designed to meet the demands of commercial environments. Both models deliver high-quality visuals and incorporate advanced technologies that make them ideal for various applications, including retail, hospitality, and corporate settings.

One of the standout features of the BDS4222V/00 and BDS4222B is their impressive display performance. With a Full HD resolution of 1920 x 1080 pixels, these displays ensure vibrant colors and sharp images, providing an engaging viewing experience for customers and audiences alike. The screens utilize LED backlighting, which enhances brightness while also improving energy efficiency, making these models both environmentally friendly and cost-effective.

Both models offer significant versatility, compatible with various media players and devices. They support multiple input options, including HDMI, VGA, and USB, allowing for easy content integration and display management. This flexibility enables users to easily connect digital signage, laptops, or other multimedia devices for dynamic content presentations.

The Philips BDS4222V/00 and BDS4222B are designed for prolonged usage with robust build quality. They are rated for 16/7 operation, making them suitable for environments that require continuous display functionality. Enhanced thermal management systems ensure that the displays maintain optimal operating temperatures, thus prolonging their lifespan and reducing the risk of overheating during extended use.

Moreover, these models feature slim bezels, which maximize the screen real estate for a more immersive viewer experience. The sleek design allows for seamless integration into various setups, whether wall-mounted or placed on a stand. The anti-glare coating on the screens minimizes reflections, making them suitable for brightly lit locations.

Another crucial aspect is the user-friendly interface provided by Philips. With simple navigation and the ability to schedule content playback, users can easily manage their presentations, ensuring that relevant messages reach their audience effectively.

In conclusion, the Philips BDS4222V/00 and BDS4222B are exemplary displays tailored for commercial use. With striking visuals, robust features, and user-friendly operation, these models stand out as reliable choices for businesses looking to enhance their digital communication efforts. Whether used for advertising, information dissemination, or presentations, they are poised to deliver performance and versatility in any environment.