Philips Clon99-BKI manual Power, Connecting the CLON99-BK Smartloader

CONNECTING THE CLON99-BK SMARTLOADER

Optimum Performance of the Clon99-BK SmartLoader box is obtained by plugging it into an ITV set that is already turned on.

BEGIN

Press the POWER button to turn the ITV ON.

Plug one end of the cable into the jack provided on the Clon99-BK SmartLoader.

Plug the other end into the jack provided on the back of the TV. The TV’s jack is next to the Antenna Input terminal and may be labeled various ways such as; Smart Port, Clone Port, etc.

Push the Slide Switch to the ON position. The red LED should light. (If the TV is turned off, it should turn on within 15 seconds.)

Within 20 seconds, the Clon99- BK SmartLoader on-screen display should appear. If the display does not appear, check the connections and push the Slide Switch to the ON position again. If there is still no response from the SmartLoader, replace its 9-volt battery.

Once the Clon99-BK SmartLoader on-screen display appears, press the POWER button on the RG4172BK (T374AH) Remote Control. The SmartLoader Setup Menu should appear.

Clon99-BK SmartLoader Connection

1

Power button on the front of an ITV.

POWER

Clon99-BK

SmartLoader

EXTERNAL

SPEAKER

75Ω ANT/

CABLE

SMART

PLUG

2

EXTERNAL		Rear jack panel
SPEAKER
	75Ω
		of ITV
	ANT/
	CABLE

SMART

PLUG

3

Cable

4

LED

5

Clon99-BK SmartLoader

On-Screen Display

6

Clon99-BK SmartLoader

Setup Menu

Clon99-BK SmartLoader ON/OFF slider switch

PHILIPS

SMARTLOADER 99

Copyright PCEC 1999

System Version D.0

PN 3135 019 01681

Philips SmartLoader 99

System Version D.0

1 - Read TV

2 - Write TV With Settings

3 - Write TV Without Settings

4 - Erase SmartLoader Memory

5 - System Test

6 - Exit SmartLoader

SLEEP

RECALLLIGHT +

M

−

VOL

A/CH MUTE

A

Press the POWER button on the remote control.

CH				6
	D
C	G
B	F
E		3
	2	6
	1	5	9
RESET	4	8
		7	0
	CC				DCM
				TV	SETUP
	CDGDE
			TV	SETUP
		POWER
			GUEST

PRESS POWER TO BEGIN

Stored Memory Type 01, 04

4