Integra DTR-7.3 Specifications, All channels, W per channel min. RMS at, distortion

Integra Division of

ONKYO U.S.A. CORPORATION

18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.

Tel: 201-785-2600 Fax: 201-785-2650 http://www. integrahometheater.com

Integra Division of

ONKYO CORPORATION

Sales & Product Planning Div. : 2-1,Nisshin-cho,Neyagawa-shi, OSAKA 572-8540, JAPAN

Tel: 072-831-8111 Fax: 072-831-8124

SN 29343422

Specifications

AMPLIFIER SECTION		TUNER SECTION
Continuous average power output (FTC)		FM
All channels:	100 W per channel min. RMS at 8	Tuning range
	Ω, 2 channels driven from 20 Hz to	USA & Canadian models:	87.5–108.0 MHz (100-kHz steps)
	20 kHz with no more than 0.08%	Australian models:	87.50–108.00 MHz (50-kHz steps)
	total harmonic distortion.	Usable sensitivity
	130 W min. RMS at 6 Ω, 2 channels	Mono:	11.2 dBf, 1.0 µV (75 Ω IHF)
	driven from 1 kHz with no more		0.9 µV (75 Ω DIN)
	than 0 . 1% total harmonic	Stereo:	17.2 dBf, 2.0 µV (75 Ω IHF)
	distortion.		23 µV (75 Ω DIN)
Continuous power output (DIN)	135 W at 6 Ω	50 dB quieting sensitivity
Maximum power output (EIAJ)	160 W at 6 Ω	Mono:	17.2 dBf, 2.0 µV (75 Ω)
Dynamic power output (stereo)	2 ⋅ 250 W at 3 Ω	Stereo:	37.2 dBf, 20 µV (75 Ω)
	2 ⋅ 210 W at 4 Ω	Capture ratio:	2.0 dB
	2 ⋅ 130 W at 8 Ω	Image rejection ratio
Total harmonic distortion:	0.08% at rated power	USA & Canadian models:	40 dB
	0.08% at 1 W output	Australian models:	85 dB
IM distortion:	0.08% at rated power	IF rejection ratio:	90 dB
	0.08% at 1 W output	Signal-to-noise ratio
Damping factor:	60 at 8 Ω	Mono:	76 dB
Input sensitivity and impedance	2.5 mV, 50 kΩ	Stereo:	70 dB
PHONO:		Alternate channel attenuation:	55 dB
LINE (CD, TAPE, DVD,	200 mV, 50 kΩ	Selectivity:	50 dB (DIN)
VIDEO 1-5):		AM suppression ratio:	50 dB
MULTICHANNEL INPUT		Total harmonic distortion
(FRONT L/C/R, SURROUND	200 mV, 50 kΩ	Mono:	0.2%
L/R, SURROUND BACK L/R):		Stereo:	0.3%
(SUBWOOFER):	36 mV, 50 kΩ	Frequency response:	30 Hz–15 kHz, ±1.0 dB
COAXIAL 1, 2, 3 (DIGITAL):	0.5 Vp-p, 75 Ω	Stereo separation:	45 dB at 1 kHz
DVD, VIDEO 1, 2, 3, 4, 5:	1 Vp-p, 75 Ω		30 dB at 100 Hz–10 kHz
	1 Vp-p, 75 Ω (Y)	AM
	0.28 Vp-p, 75 Ω (C)	Tuning range
COMPONENT VIDEO 1, 2:	1 Vp-p, 75 Ω (Y)	USA & Canadian models:	530 to 1,710 kHz (10-kHz steps)
	0.7 Vp-p, 75 Ω (PB, PR)	Autralian models	522 to 1,611 kHz (9-kHz steps)
Output level and impedance		Usable sensitivity:	30 µV
Rec out (TAPE, VIDEO 1, 2):	200 mV, 470 Ω	Image rejection ratio:	40 dB
		IF rejection ratio:	40 dB
Pre out:	1 V, 470 Ω	Signal-to-noise ratio:	40 dB
VIDEO (VIDEO 1, 2, MONITOR		Total harmonic distortion:	0.7%
OUT, ZONE 2 OUT):	1 Vp-p, 75 Ω	GENERAL
	1 Vp-p, 75 Ω (Y)
		Power supply
	0.28 p-p, 75 Ω (C)
COMPONENT VIDEO OUT:	1 Vp-p, 75 Ω (Y)	USA & Canadian models:	AC 120 V, 60 Hz
	0.7 Vp-p, 75 Ω (PB, PR)	Australian models:	AC 230–240 V, 50 Hz
Phono overload:	120 mV RMS at 1 kHz, 0.5% T.H.D.	Power consumption
Frequency response:	5 Hz to 100 kHz : +1/–3 dB	USA & Canadian models:	8.1 A
	(CD in Direct mode)	Australian models:	655 W
RIAA deviation:	20 Hz to 20 kHz : ±0.8 dB	Dimensions (W ⋅ H ⋅ D):	435 ⋅ 175 ⋅ 460 mm
Tone Control			17-1/8" ⋅ 6-7/8" ⋅ 18-1/18"
Bass:	±10 dB at 50 Hz	Weight:	38.4 lbs. (17.4 kg)
Treble:	±10 dB at 20,000 Hz	REMOTE CONTROLLER
Signal-to-noise ratio (Direct)
		Transmitter:	Infrared
Phono:	80 dB (IHF A, 5 mV input)
		Signal range:	Approx. 16 ft., 5 meters
Line:	110 dB (IHF A, 0.5 V input)
		Power supply:	Two “AA” batteries (1.5 V ⋅ 2)
Muting:	Due to setup menu

Specifications and features are subject to change without notice.

Printed in Japan D0210-1