Integra DTR-7.3 Controlling an Integra/Onkyo MD recorder, Using remote controller, Rec : Record

Using remote controller

On Standby

SAT/MD Mode

VOL

Muting

MD

operation buttons

Numeric keys

Enter

Controlling an Integra/Onkyo MD recorder

The connector of the Integra/Onkyo MD recorder must be connected to the DTR-7.3 (see page 26).

1.Press the SAT/MD Mode button.

The SAT/MD Mode button lights.

2.Press the desired operation button.

The buttons shaded in the figure to the left are the operation buttons that can be used to control an Integra/Onkyo MD recorder.

Operation buttons:

On: Turns on and off MD player (same as Standby button on the remote controller)

: Track down

: Track up

: Play

: Stop

: Skip backward

: Skipt forward

Rec ●: Record

: Pause

: Eject

1 to 9, 0, --/---: Numeric keys

ENTER: Enters the settings

You may also use the following buttons:

VOL : Adjusts volume at DTR-7.3

Muting: Activates muting function at DTR-7.3

Note:

The SAT/MD button is used for operating satellite tuners and Integra/Onkyo MD recorders. Be aware that if you enter the preset code for a satellite tuner as shown on page 65, then this button cannot be used to operate Integra/Onkyo MD recorders.

If this is the case, to operate an Integra/Onkyo MD recorder, you must first erase the satellite tuner code by following the directions given in “Erasing all the commands programmed under a MODE button” on page 70.

64