Integra DTR-7.3 instruction manual Setup Menu, Basic Menu, Advanced Menu

Setup Menu

When making the various settings required to configure your DTR-7.3 for optimum performance, you can either use the OSD Menu that appears on your television monitor or you can use the display on the front of the DTR-7.3. The OSD Menu is a settings menu that is displayed on your TV monitor. For your reference when performing the setting procedures, this manual shows both the OSD Menu displayed on your television monitor and the display on the front of the DTR-7.3.

The Setup Menu consists of the Basic Menu that is divided up into 4 menus, the Hardware Setup Menu, Speaker Setup Menu, Input Setup Menu, and Audio Adjust Menu, and the Advanced Menu that contains the menus of the Basic Menu plus the Preference Menu, and Network Setup Menu. These menus are then divided up into various sub-menus, and these contain settings for you to optimize your home theater as you wish.

The display shown below is an example. The actual contents of your display may differ depending on the model of your region and the selected input source.

		0.Hardware Setup			0.Hardware Setup
			1.Speaker Impedance			1.Speaker Impedance
Basic Menu			2.Surr Back/Zone2			2.Surr Back/Zone2
			3.IR IN Setup			3.IR IN Setup
Your DTR-7.3 is provided with a
Basic Menu for those who are not
familiar with many of the advanced			ENTERQuit:SETUP				ENTERQuit:SETUP
settings of an AV receiver or those
who wish to watch movies and listen		1.Speaker Setup			1.Speaker Setup
to music with the minimal amount of
setup. With the Basic Menu, the			1.Speaker Config			1.Speaker Config
settings that rarely need to be set or
			2.Speaker Distance			2.Speaker Distance
that are only needed for advanced
fine-tuning of the sound quality are			3.Level Calibration			3.Level Calibration
not displayed.
				ENTERQuit:SETUP			ENTERQuit:SETUP
	Basic Menu
	0.Hardware Setup	2.Input Setup			2.Input Setup
	1.Speaker Setup			Input:DVD			Input:DVD
	2.Input Setup		1.Digital Setup			1.Digital Setup
	3.Audio Adjust
			2.Multichannel Setup			2.Multichannel Setup
			3.Video Setup			3.Video Setup
	→Advanced Menu		4.Character Input			4.Character Input
			5.IntelliVolume			5.IntelliVolume
						6.Listening Mode Preset
	ENTERQuit:SETUP					7.12V Trigger

		ENTERQuit:SETUP	ENTERQuit:SETUP
Note:		3.Audio Adjust	3.Audio Adjust
The Hardware Setup Menu is accessible from		1.Tone Control	1.Tone Control
the Basic Menu at an initial setting. After
			2.Surround Speakers
brought up on the screen and set any of its
		2.Surround Speakers	3.Sound Effect
items, the menu is no longer available from the			4.Delay
		3.Sound Effect	5.LFE Level
Basic Menu.
		→default	6.Mono
In this case, you can gain access to the menu via			7.Theater-Dimensional
			8.Surround
the Advanced Menu.		ENTERQuit:SETUP
			3.Audio Adjust
Advanced Menu			9.THX
The Advanced Menu provides features such as the Listening Mode Presets that allow
			10.Mono Movie
you to customize the output sound for movies and music just the way you like and the			11.Enhanced 7
AV Sync Setup that allows you to adjust for discrepancies between the video and audio			12.Orchestra
			13.Unplugged
timing. Settings listed with	next to their name are settings that can be set		14.Studio-Mix
using the Advanced Menu.			15.TV Logic	→default
Advanced Menu			4.Preference

0.Hardware Setup		1.Volume Setup
1.Speaker Setup
2.Input Setup		2.HeadphonesLevelSetup
3.Audio Adjust
4.Preference		3.OSD Setup
5.Network Setup
→Basic Menu	5.Network Setup	4.OSD Position

ENTERQuit:SETUP	Refer to the DTR-7.3		1.IP Address	ENTERQuit:SETUP
	“How to	enjoy Net-
			2.Proxy Setup
	Audio”	instruction
			3.MAC Address
	manual,	a separate	4.Client Setup
	volume, for description		→Save Setting
	of the network-related
	settings.		ENTERQuit:SETUP	39