Integra DTR-7.3 instruction manual Navigating through the Setup Menu

Setup Menu

OSD

Front panel display

Advanced Menu

0.Hardware Setup

1.Speaker Setup 2.Input Setup

3.Audio Adjust 4.Preference 5.Network Setup

→Basic Menu

ENTERQuit:SETUP

Main menu

1.Speaker Setup

1.Speaker Config

2.Speaker Distance 3.Level Calibration

ENTERQuit:SETUP

Menu

1-1.Speaker Config

a.Subwoofer	:Yes
b.Front L/R	:Small
c.Center	:Small
d.Surr L/R	:Small
e.Surr Back	:Small

f.Crossover:80Hz(THX)

Quit:SETUP

Sub-menu

Navigating through the Setup Menu

You can change settings in the Setup Menu using the buttons on the front panel and on the remote controller.

The buttons on the remote controller correspond to those on the DTR-7.3 as shown below.

Button on remote controller	Button on DTR-7.3
SETUP	SETUP
(upper edge of	UP
ENTER button)
(lower edge of	DOWN
ENTER button)
(left edge of	LEFT
ENTER button)
(right edge of	RIGHT
ENTER button)

1.Press the Setup button.

The main menu (Advanced Menu or Basic Menu) appears on your television monitor.

2.Using the and cursor buttons, select the menu that you want to enter.

3.Press the Enter button to enter the selected menu.

The screen for that menu appears.

4.Use the and cursor buttons to select the sub- menu that you want to enter and press the Enter button.

Each sub-menu has different settings that can be changed as desired, and they are all explained in the pages that follow. To change a setting, first select it using the and cursor buttons, and then change the setting using the and cursor buttons.

5.Press the Return button to set the new settings and return to the previous menu screen. Press the Return button again to return to the main menu.

Note:

Press the setup button to exit the Setup Menu immediately.

ENTER

ENTER

RETURN

RETURN

40