Troubleshooting guide
VIDEO and AUDIO
Desired picture does not appear.
•Improper connection.
➞Check connections. Insert the plugs and connectors completely (see pages 16, 19).
•Video Setup
➞Check settings at Setup Menu → Input Setup Menu → Video Setup
No OSD Menu display.
•Improper connection.
➞Check connections (see pages 17).
•OSD Menu is displayed when monitor is connected to VIDEO or S VIDEO of MONITOR OUT.
➞Check connections (see page 17).
Audio and video do not match.
•Improper connection.
➞Check connections (see page 16, 19).
•Video Setup
➞Check settings at Setup Menu → Input Setup Menu → Video Setup
Audio is not heard or audio from different source is heard.
•Digital Setup
➞Check settings at Setup Menu → Input Setup Menu → Digital Setup
No picture appears on the TV screen (or monitor).
•TV (or monitor) is not set to receive the output signals from the receiver.
➞Set the TV (or monitor) to the receiver input.
•Video cable is not connected securely.
➞Check connections (see pages 16, 19).
•Input source is connected to the COMPONENT VIDEO IN connectors.
➞Make sure TV (or monitor) is connected to COMPONENT VIDEO OUT connectors (see page 17).
REMOTE CONTROLLER
Front panel controls function but remote controller controls do not.
•No batteries in remote controller.
➞Insert batteries (see page 7).
•Batteries have worn out.
➞Replace batteries (see page 7).
•Remote controller is not pointed at the remote sensor of the
➞Point the remote controller at the remote sensor of the DTR- 7.3 (see page 7).
•Remote controller is too far from the
➞Operate the remote controller within 16 feet (5 meters) (see page 7).
•Remote controller is functioning in a different mode
➞Press the RCVR Mode button.
OTHER
LATE NIGHT function cannot be used.
•Playback source is not Dolby Digital encoded.
➞Check that the DOLBY DIGITAL indicator lights up on the display.
•Listening mode is set to
➞ Select different listening mode (see page 58).
Desired parameter cannot be set.
•Parameter may not be able to be set due to current listening mode.
➞ Check settings in Audio Adjust Menu (see page 58).
Multichannel audio is not output.
•The Multichannel setting is set to “No.”
➞Set the Multichannel setting to “Yes” at Setup Menu → Input Setup Menu → Multichannel Setup
•Input source is not connected to MULTI CHANNEL INPUT port.
➞Check connections (see page 27).
Components in remote zone (Zone 2) do not operate properly.
•Components are incorrectly connected.
➞Check connections.
•Objects are interfering with remote controller signals.
➞Move inferring objects away from path of remote controller signals.
Sound is sometimes heard and sometimes not heard with digital sources.
•One digital input format has been specified so other digital formats are not played.
➞Select “All” at Setup Menu → Input Setup Menu → Digital Setup
Noise during playback or skipping of the beginning sounds occurs with DTS sources, PCM sources, and other digital sources.
•When “All” is set for the digital format setting, time is required to change formats when different sources are played.
➞Try specifying the format you are playing at Setup Menu → Input Setup Menu → Digital Setup
The unit cannot be switched to Dolby EX or
•“Surr Back/Zone 2” is set to “Zone 2.”
➞Change the “0. Hardware Setup →
•The “Surr Back” setting is set to “None.”
➞Set the “Surr Back” setting to “Large” or “Small” at Setup Menu → “1. Speaker Setup Menu” →
74