Integra DTR-7.3 Miscellaneous Connections, Connecting auxiliary power amplifier, 1 2 3 4

Miscellaneous Connections

Connecting to an external device with 12V TRIGGER terminal

These terminals are provided so that you can use the operation of the DTR-7.3 control the operation of another externally connected device. Connect the component to this 1/8-inch mini-jack terminal and when the set input source is selected, the device will turn on. Set the 12V TRIGGER terminal using the Setup menu: Input setup → 12V trigger (see page 52).

When the DTR-7.3 is in the ZONE 2 mode, this terminal outputs at 12 V/100 mA.

Connecting to devices with analog multi channel output

Connect a DVD player, MPEG decoder, or other component that has

Connecting auxiliary power amplifier

These jacks are for connecting auxiliary power amplifier.

You can use an auxiliary power amplifiers to listen at louder volumes than you can with the DTR-7.3 alone. When using a power amplifier, connect each speaker to the power amplifier.

Lto white

Front

to Red

R	DIGITAL	PRE OUT
	INPUT	R	L
	COAX	FRONT
	1
Subwoofer	to Purple	SUB	CENTER
	2

			SURR
Surround	L	to3 Brown	SURR
back		OPT		R	L
			ZONE 2
			BACK/
		to1 Tan
	R	2	FRONT		MULTI C
					INPUT

a multi channel port for 5.1 channel or 7.1 channel output.

L

Surround

to Blue

to Gray

R

L

Front output

R

Subwoofer

to white to Red

DIGITAL	PRE OUT
INPUT	R	L
COAX	FRONT

to Purple1

SUB CENTER

2

Center to Green

Power amplifier

L

Surround

R

Ex: DVD-Audio player/MPEG

decoder

R

Surround back

L

to Blue

3

OPT

1

to Gray

2

3

DIGITAL

OUTPUT

OPT

to Tan to Brown

SURR
SURR	R	L
BACK/
ZONE 2
FRONT		MULTI
		INPUT
R		L
SUB		CENTER

SURR

R L

SURR

BACK

GND

1 2 3 4 5

1.Front left speaker

2.Front right speaker

3.Subwoofer

4.Surround back left/ ZONE 2 left speaker

6 7 8

5.Surround back right/ ZONE 2 right speaker

6.Surround left speaker

7.Surround right speaker

8.Center speaker

Center

to Green

27