Operating your programmed remote controller
After entering a
On 
Standby
SAT/MD Mode
ENTER,
CH 
VOL
Menu
Muting
Numeric keys
Enter
DVD Mode (DVD Player Mode)
Operations are the same as explained on page 62.
SAT Mode (Satellite Tuner Mode)
1.Press the SAT/MD Mode button.
The SAT/MD Mode button lights.
2.Press the desired operation button.
The buttons shaded in the figure to the left are the operation buttons that can be used to control your satellite tuner unit.
The buttons given below have operations programmed into them.
On: Turns on and off satellite tuner unit (same as Standby button on the remote controller)
CH 
: Changes selected preset channel 
: Moves cursor
ENTER: Confirms selection
Menu: Displays menu
0,1 to 9: Numeric keys
ENTER: Confirm
You may also use the following buttons:
VOL 
: Adjusts the volume at the
Muting: Activates the muting function at the
On 
Standby
Cable Mode
CH | VOL |
Muting
Numeric keys
Enter
Cable Mode (Cable Mode)
1.Press the Cable Mode button.
The CABLE button lights.
2.Press the desired operation button.
The buttons shaded in the figure to the left are the operation buttons that can be used to control your cable TV unit.
The buttons given below have operations programmed into them.
On: Turns on and off cable TV unit (same as Standby button on the remote controller)
CH 
: Changes selected preset channel
0,1 to 9: Numeric keys
ENTER: Confirm
You may also use the following buttons: VOL 
: Adjusts the volume at the
67
