Philips SNN6500 user manual Configuration sub-tab Security, Link information, IP information

Page 14

EN

•Configuration – sub-tab Security

First, click the Security ON/OFF button to enable or disable wireless security.

Authentication Type – Choose WEP or WPA-PSK depending on the type of wireless security in the rest of your wireless network.

Wired Equivalent Privacy (WEP) and WiFi Protected Access (WPA) are implemented in the adapter to prevent unauthorized access to your wireless network.

Key Type – For more secure data transmissions, set encryption to the highest number of bits. E.g. a 128-bit setting gives you a higher level of security than 64-bit. IMPORTANT: The setting must be the same for all clients in your wireless network.

Use Passphrase – If Passphrase is selected, security keys for WEP encryption are generated from your passphrase string. If encryption is set to 128 bit, only Key 1 is generated. If encryption is set to 64 bit, Keys 1-4 are generated.You must use the same Passphrase and Default Key settings on all the other stations in your network. Note: A passphrase string can consist of up to 32 alphanumeric characters.

The WPA (WiFi Protected Access) implemented in this Wireless Notebook Adapter11g True Turbo 108 Mbps uses an alphanumeric password between 8 and 63 characters long. This password may include symbols and spaces. IMPORTANT: You must use the same encryption key throughout your network.

Apply changes – Click on “Apply changes” to activate the changes you made.

Key 1-4– If the Key Type is set to Hex, the security keys are four 10 digit keys for the 64-bit WEP setting and four 26-digit keys for the 128-bit WEP setting.

(The hexadecimal digits can be 0~9 & A~F, e.g. D7 0A 9C 7F E5.)

Default Key – Choose the Key ID that has the encryption string you prefer. If you are using a key generated from the passphrase, you must use the same passphrase and key on each wireless device.

•Link information

The Link information tab displays information on the wireless network name (SSID) to which there is a wireless connection: the signal strength, Troughput history, current connection speed, channel and Base station Name ID (MAC).

•IP information

The IP information tab displays information on the Host Name,

IP Address, IP Netmask, and Gateway.

This window also contains buttons for releasing and renewing the IP address.

This is done to bring a computer back onto the network after moving it to a different location, or after experiencing an unexpected outage.

First release, then renew the IP address. Computers on DHCP networks often (but not always) re-establish network connectivity automatically.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents
SNN6500 Danmark Österreich Helpline België/Belgique/Belgien NederlandLuxemburg/Luxembourg Norge Deutschland PortugalContents Environmental information Important safety informationSafety Precautions DisclaimerWhat’s in the box What else you’ll needIntroduction What are wireless network connections?Securing your wireless network SNN6500Integrated antenna Connector to notebookIndicator LED Colour MeaningInstall Install the driversPage Connect Start Philips Wireless Network Manager programView the available wireless networks Select Site Survey Connect to your networkAdvanced Go to security settings Select Configuration tabInput Security settings Select your Authentication Type Select the Network Type Go to the Security settings Setup of an Ad Hoc computer networkCreate an Ad-Hoc wireless network Click on Configuration Setup the encryption Select your Authentication TypeConfiguration Accessing your wireless network settingWhat do the settings mean Configuration sub-tab CommonIP information Configuration sub-tab SecurityLink information Site Survey Version informationNetwork terminology Wired Network with More than 2 PCs Wireless Network with More than 2 PCsGlossary of terms Troubleshooting Network Connection Problems ProblemPossible cause SolutionPage FCC compliance EC Declaration of Conformity Type SNN6500 Serial nr