Philips LC5241 manual Introduction Things You Should Know

1. Introduction 2. Things You Should Know

Table of contents
0.	Controls and connections	2
1.	Introduction	4
	Table of contents	4
	Introduction	4
	Packaging contents	4
2.	Things You Should Know	4
3.	Important Safeguards	5
4.	Projector Features	6
5.	Functional Overview	7
	Projector	7
	Remote control	7
6.	Set Up	8-10
	Positioning the projector and screen	8
	Mains supply	8
	Adjusting the focus of the image	9
	Adjusting height and level of the projector	9
	Moving the projector	9
	Inserting the batteries in the remote control	10
	Using the remote control as PC mouse	10
7.	Installation	11-14
	Video/computer cables and adapter	11
	Connecting to a computer	12
	Connecting to PC mouse connector	12
	Connecting to video equipment	13
8.	Operation	15-21
	Preparation	15
	Menu structure - data input	16
	Menu structure - video input	17
	Display and picture control / Audio volume control	18
	Other settings	20
9.	Maintenance	22-23
	Cleaning	22
	Lamp replacement	22
	Lamplife time	23
10. Troubleshooting		24

Introduction

Congratulations on your purchase of one of the most spectacular multimedia projectors on the market today. We are sure that, used properly, it will bring you years of enjoyment. You will want to keep this manual handy, as it is a convenient source of information about your projector. For your own protection and prolonged operation of your projector, please read the ‘Important Safeguards’ section before use.

Packaging contents

Please confirm that the following items are packed in the accessories box. They are provided to help you use or set up your projector.

–UGO X-lite Impact or S-lite Impact (resp. XGA or SVGA) projector

–Remote control + 2 x AAA 1,5V/LR03 batteries

–Power cord (USA version + Continental Europe version)

–VGA Cable

–Mouse cable set (PS/2 + USB)

–RCA Video cable

–PC Audio cable

–S-Video cable

–Audio conversion cable

–Soft carrying bag + Cable bag

–User guide (CD-ROM + Quick Reference Guide)

Note: This equipment has been tested to comply with the limits for a class A digital device in accordance with Part 15 of the FCC Rules as well as the European CE marking and Canadian ICES-003.

Operation is subject to the following two conditions:

1.This device may not cause harmful interference, and

2.This device must accept any interference received, including interference that may cause undesired operation.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the user’s guide, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

–Reorientate or relocate the receiving antenna.

–Increase the distance between the equipment and receiver.

–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

–Consult the dealer or an experienced radio/TV technician for help.

FCC Warning:

To assure continued compliance, use only the provided grounded power supply cord and shielded interface cables when connecting this device to a computer. Also, any unauthorized changes or modifications to this equipment could void the user’s authority to operate this device.

Note: Save energy! Please put the projector in the STANDBY position if you are not going to use the projector for more than 15 minutes.

Important note for users in the U.S.A.

The responsible party of this multimedia projector is the following:

Philips Consumer Electronics Company

One Philips Drive

Knoxville, TN 37914

Telephone (1888) 873-4672

Lamp replacement

Be sure to replace the lamp when the status indicator comes on. If you continue to use the lamp after 1000 hours of usage, the lamp will turn off.

IMPORTANT

Digital Light Processing, DLP, Digital Micromirror Device and DMD are all trademarks of Texas Instruments Inc.

Windows 98, Windows 95, and Windows 3.1 are registered trademarks in the United States and other countries of Microsoft Corporation. IBM is a registered trademark of International Business Machines Corporation. Macintosh and MAC are trademarks of Apple Computer Inc. Other names of companies and products mentioned are trademarks and registered trademarks of the respective companies.

4