Philips LC5241 Operation Display and picture control/Audio volume control, Data Mode Normal Menu

Page 18

8. Operation

Display and picture control/Audio volume control

 

 

General

The projector’s picture is set to standard specifications at the factory. However, you can adjust the image to suit your own preferences. The projector will store the last used settings for every source. So when you switch from one source to another, the settings of the source switched from will be stored and the settings of the source switched to will be recalled. When the projector is switched off and on again the settings for the selected source will be recalled again.

Direct access projector functions via the remote control unit

Digital features - for data and video/s-video signal input: (Open the Flip cover of the remote control unit)

D-Freeze (Digital Freeze)

A still image of the current frame is displayed. To restore the present picture, press the button again;

D-Zoom (Digital Zoom)

While the button is pressed the picture is enlarged until it becomes ten times the original size Release the button at the desired size. To reduce the size of the projected image: press D- Zoom – button. When this button is released, the screen will return to 90% reduction.

To move to the desired portion of the enlarged picture, press the desired portion of the cursor key. The available directions are indicated by the four large triangle marks on the cursor key. The picture will move in the direction of the mark you are pressing.

Note: Less than the original size of the picture cannot be moved because the whole image is fully displayed.

D-Keystone (Digital Keystone)

Corrects picture distortion of the vertical keystone type by internal scaling.

Audio volume control

Volume

The audio volume via the built-in speaker can be adjusted with the Volume -/+ buttons on the remote control;

A/V Mute

By pressing the A/V Mute button on the Remote control unit, the image will turns off and the sound is muted at the same time. To restore the picture and sound, press the button again.

Digital features - for data signal input only:

Auto image

This function can be activated by pressing the Auto image button on the local keyboard or on the remote control unit. The auto image function automatically sizes and positions the image to fit optimally in the screen picture in accordance with the resolution. In addition it takes care for phase adjustment. It does not affect the selected picture format.

In case after the Auto image setting the picture still is not of satisfactory performance, manual setting for possible further improvement can be made. For details see ‘Data mode - Normal menu’.

Note: In case the Auto image feature is addressed in Video mode, the picture will mute for a short while. No setting of Auto image will take place in Video mode.

Menu access of projector functions

DATA MODE - NORMAL MENU

Press the Menu button with the flip cover of the remote control closed, to display the normal menu, then use the cursor key (up/down) to select the display and picture control functions. After selection of the required function, set the required value setting by means of the cursor key (left /right).

IMAGE (Picture control)

BRIGHTNESS

Adjusts brightness of the displayed picture;

CONTRAST

Adjusts the overall contrast intensity;

PICTURE ADJ. (Size)

Adjusts the computer image in a horizontal direction to make the image completely fit the screen. Adjustment is performed in dot units. Adjust to the position where vertical flicker disappears.

The PICTURE ADJ. function is used to size a computer image to make it fit the projected picture, both horizontally and vertically. The horizontal size parameter has permanent scope. When the OSD menu is active and the horizontal size option is selected, the level will be indicated graphically on a linear scale (gauge). The default output level conforms to the value set by the Auto image function. Switching to another data mode automatically restores Auto image if the data mode is not part of the ten most recently used display modes;

FINE PICTURE (Phase)

Press the cursor key to the left or right and adjust to minimize image noise, flicker, color variations, etc.;

POSITION

Adjusts the computer image in horizontal and vertical direction to centre it on the screen.

To activate the POSITION setting, press the OK button on the remote control when POSITION is addressed in the IMAGE setting menu. With the cursor key you can move the picture in the required position.

Tip for Windows users:

To adjust size and phase correctly:

1.Select ‘Start’ and then ‘Shut down’.

2.Adjust the projectors size control, so that no vertical bars are visible.

3.Now adjust the projectors phase control for maximum brightness of the projected image.

4.Press ‘No’ in the Windows shutdown screen to cancel the shutdown action.

18

Image 18
Contents Philips Multimedia projector LC5241, LC5231 Controls and connections Mouse Introduction Things You Should Know Important Safeguards Projector Features Functional Overview See illustrations £ LEDDistance and image sizes UGO X-lite Impact LC5241 Set UpPositioning the projector and screen Mains supplySkew correction Adjusting the focus of the imageProjection angle Vertical keystone correctionInserting the batteries in the remote control Using the remote control as PC mouseRemote control mouse functions Installation Video/computer cables and adapter Video/computer cablesOptional cables and adapter Connecting to PC mouse connector General Installation Connecting to a computerConnecting to a computer General PC Personal computerComposite Video Signal Installation Connecting to video equipmentConnecting to video equipment General Scart adapter optional OptionalComponent Video Signal YCbCr Optional On Screen Display Operation PreparationPreparation General On Screen Display menu General explanationData mode Normal menu flip cover closed Operation Menu structure data inputVideo mode Normal menu flip cover closed Operation Menu structure video inputBrightness Operation Display and picture control/Audio volume controlData Mode Normal Menu ContrastOperation Display and picture control Operation Display and picture control/Other settings Operation Other settings Always keep the lens clean MaintenanceCleaning Cleaning the ventilation slotsLamp life time Troubleshooting Problem

LC5241 specifications

The Philips LC5241 is a significant innovation in the realm of display technology, offering a remarkable blend of features that cater to both professional and home entertainment users. This model stands as a testament to Philips' dedication to producing high-quality displays that don't compromise on performance or user experience.

One of the standout features of the Philips LC5241 is its advanced LED backlighting technology. This ensures vibrant colors and sharp contrasts, elevating the visual experience. The display utilizes Dynamic Contrast Ratio, allowing users to enjoy deeper blacks and brighter whites, which results in a more engaging viewing experience. The resolution of the LC5241 is another key characteristic, with Full HD (1920 x 1080) capabilities, offering crisp and detailed images that are essential for gaming, movie watching, and detailed graphic work.

The LC5241 is equipped with SmartContrast technology, a feature designed to automatically adjust the contrast of imagery based on the content being displayed. This intelligent system enhances the dynamism of images, making them more lifelike and immersive, especially in gaming or high-action movies.

In terms of connectivity, the Philips LC5241 features multiple HDMI ports, USB ports, and VGA options, ensuring versatility for users who want to connect various devices such as gaming consoles, PCs, and home entertainment systems. The seamless connectivity allows for effortless transitions between different content sources, making it an ideal hub for media consumption.

The design of the LC5241 also deserves mention, as it boasts a sleek and modern aesthetic. With ultra-narrow bezels, it maximizes the screen area, providing a more immersive visual experience. Its ergonomic stand ensures that users can easily adjust the viewing angle for ultimate comfort during prolonged use.

Additionally, the LC5241 incorporates low blue light technology, which minimizes eye strain during extended viewing sessions. This feature is increasingly important as users spend more time in front of screens, making the Philips LC5241 a thoughtful choice for those concerned about eye health.

In summary, the Philips LC5241 is a versatile display that combines advanced technology, user-friendly features, and an appealing design. Whether it's for professional use or entertainment, this model delivers exceptional performance that caters to a wide range of consumer needs, solidifying Philips' reputation in the competitive display market.