7. Installation - Connecting to Component video equipment
Connecting to Component video equipment
Note: The characters in brackets (a) correspond to characters in fig. 2 of ‘Controls and connections’.
Caution!
Always switch off external equipment and projector before making any connections.
(h)
Audio out | USB Video | Data out |
Data in |
Optional
1.Connect the 15 pin connector of an optional component/HD input cable to the Data in terminal (h) of the projector.
2.Connect the other end of the cable to the appropriate outputs of your Component video equipment (e.g. DVD player, Settop Box, etc.).
Red Green Blue Grey Black
DVD player, Settop Box, etc.
R G B H V
Red Green Blue Grey Black
DVD player, Settop Box, etc.
R G B Y/S
Red Green Blue Grey Black
DVD player, Settop Box, etc.
Pr Y Pb
Cr Y Cb
V Y U
Note: Connections that are not in use in your particular situation need not be connected.
13