Philips Garbo manual Lamp indicator, Temperature indicator

Page 32

The projector does not react to commands from the remote control

Indicators

Picture too dark or bright with external monitor connected

No reaction when pressing keys on local keyboard or remote control

7.Troubleshooting

>

–Distance is too great.

• Reduce distance.

–Batteries are exhausted.

•Replace batteries (see ‘Inserting the batteries in the remote control’).

–IR sensor is obstructed.

• Remove obstacle.

Lamp indicator

–green: normal lamp condition.

–orange: lamp life has almost expired (less than 100 hours to go).

•See warning messages on the start up screen for details.

–red: lamp life has expired.

•Replace lamp. See ‘Maintenance’.

–red (fast blinking): lamp start has failed.

•Disconnect projector from the mains. Reconnect and restart. If this does not resolve the problem, replace the lamp. See ‘Maintenance’.

Temperature indicator

–red: temperature error.

•The projector will go into Power/Standby mode. Allow the projector to cool down;

this may take up to 30 minutes. When the LED goes out press any button to activate the projector again.

–fast blinking red: fan error.

•The projector will go into Power Standby mode. Make sure the filter cover is closed properly; clean air inlets or dust filter and allow the projector to cool down; this may take up to 30 minutes. When the LED stops flashing press any button to activate the projector again.

Standby indicator (text on Standby button/ring around Standby button)

–red: standby mode.

–green: operation mode.

–orange: warming up.

–slow blinking (orange): cooling down.

• Do not switch the projector off; it will restart the lamp automatically within a few seconds.

–’Monitor out’ has been enabled, but the external monitor is not correctly connected (the picture on both displays is too bright).

•Connect the (optional) VGA Y-cable (See ‘Connecting to an external monitor’ under ‘Installation’).

•If the VGA Y-cable is correctly connected, verify whether the input impedance of the monitor is correctly set on 75 Ohm.

–’Monitor out’ has not been enabled, but the external monitor is connected (the picture on both displays is too dark).

•Enable the ’Monitor out’ option. Press Menu and use cursor control to go to ‘Settings’ in the menu bar. Select ’Monitor out’ and select ‘On’.

–’Keylock’ active.

• Press OK for 10 seconds to cancel ‘Keylock.’

Philips Home Cinema Projector

English User guide Garbo

32

 

 

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Garbo Set up InstallationIndex IntroductionMaintenance TroubleshootingIndex OperationIntroduction Source + 3 Menu Standby/ Standby indicator Functional overviewControls Remote control Functional overviewVideo source connections Data source connectionsSet up Switching on the projectorSet up General information Video input Computer inputUniversal Serial Bus USB External monitor connectionInstallation Scart connection CvbsInstallation Connecting to video equipment Component/HDTV Pr,Y, Pb/Cr,Y, CbScart connection Rgbs InstallationConnecting to a computer PC/MacintoshInstallation Connecting to an external monitorMessages General explanationFeedback messages Some examplesOperation Menu treeFactory reset Key lock OK 3 sec Min Max Treble Mute OffLanguage Eng Esp Deu Fra Por Ita Chi Monitor out OffOperation General explanation 1 Press MenuDisplay adjustments Video/S-Video adjustmentsPicture adjustments Computer adjustments PhaseAuto image Horizontal sizePicture Format Press MenuHorizontal size Digital Zoom/MagnificationAuto image Shift Audio adjustments General adjustmentsGeneral settings Maintenance CleaningCleaning the cabinet Cleaning the lensMaintenance Lamp ReplacementPush tab a to the right and remove the lamp door Read the caution and warning labels on the lamp holderTime Menu bar appears on the screenTroubleshooting Component Video modeRead as follows GeneralTroubleshooting Data modeImage is blurred Picture rolls No sound Case of Rgbs Scart connectionLamp indicator Temperature indicatorCase of USB connection TroubleshootingBatteries

Garbo specifications

Philips Garbo is an innovative and advanced vacuum cleaner that exemplifies the brand's commitment to creating efficient, user-friendly, and environmentally conscious household appliances. Designed with a sleek and modern aesthetic, the Garbo stands out not just for its appearance but also for its impressive array of features and technologies that cater to the needs of today’s consumers.

One of the most notable features of the Philips Garbo is its powerful suction capability. Utilizing advanced motor technology, the vacuum cleaner delivers strong suction performance on various surfaces, from carpets to hard floors. This versatility ensures that users can efficiently clean their homes without the need for multiple cleaning devices. The vacuum also incorporates specialized brush designs that enhance dirt and dust pickup, allowing for thorough cleaning with minimal effort.

Another significant characteristic of the Philips Garbo is its lightweight and ergonomic design. Weighing in at approximately 4.2 kg, the vacuum is easy to maneuver, making it suitable for users of all ages. The handle is designed for comfort, providing a secure grip and reducing strain during extended cleaning sessions. Additionally, the compact design allows for easy storage in limited spaces.

The Philips Garbo also boasts a bagless system, which promotes hassle-free maintenance. Equipped with a high-capacity dust container, it minimizes the need for frequent emptying while ensuring maximum cleanliness. The EasyClean Filter technology further enhances the vacuum cleaner's efficiency by capturing allergens and microscopic particles, making it an excellent choice for allergy sufferers.

Another standout feature is its noise-reduction technology that allows the vacuum to operate quietly, ensuring a peaceful cleaning experience without disturbing others in the household. This aspect positions the Garbo as an ideal choice for families with small children or pets.

Furthermore, Philips emphasizes sustainability in the Garbo's design. The materials used in manufacturing are recyclable, and the overall construction reflects the brand’s commitment to reducing its environmental footprint. The vacuum cleaner’s energy-efficient motor helps to lower energy consumption, making it an eco-friendly choice.

In summary, Philips Garbo combines powerful suction, lightweight design, advanced filtration, and eco-friendly attributes to provide users with a versatile and efficient cleaning solution. Its thoughtful features reflect Philips' dedication to innovation and customer satisfaction, making it a trusted choice for modern households.
Top Page Image Contents